ok guys i tried to search this but got nothing, so let me know how much power your actually pushing and post some pics for the hell of it

thanks, z

plenty

92hp@4700rpm
114 ft-lb torque@3800rpm

Take it easy on the guy guys.... Z is a pretty kool guy. He has a Boosted S10 that built 100% by himself. I guided him on his tune (kept it safe, stock bottom end/daily driven) and am going to help him build an engine when the time is right..... BTW, we need to hang sometime soon... (avoid getting pulled over )



P&P Tuning
420.5whp / 359.8wtq

Who's being hard on him? Those were my actual numbers lol.

lol, i been out of trouble hehe for the most part, i have already ordered rods from a guy on here but still waiting for them to arrive, and i have a lot of free time now i finished school so give me a call man,

but seriously guys let me know some specs

theres a horsepower list on the forum here, just do a quick search and i'm sure you'll find it no problem, ryans pretty high up on that list

edit, look in the racing forum, its under top 25 horsepower list


Edited 1 time(s). Last edited Tuesday, January 13, 2009 11:26 PM


Fire is gone unfortunately! Parts 4 sale, look in Mid-Central...

Im waiting to post numbers until I get back on the dyno with my new equipment.....and SD tune **cough cough** Ryan, call me sometime to discuss **cough cough**

Lets just say, Ryans numbers on his old setup aka stock bottom end aint got much on me

Its ok john, You can tell them you strive to break 200

Haven't dynoed it yet, have some more changes for it being unleashed this spring

my ohv is currently putting down 0 hp.....kinda hard when the motor is missing alot of parts..... it rolls rather nicely though.

ecotecpower wrote:Its ok john, You can tell them you strive to break 200

SHHH!!!! dont let me secret out!!!

John Benham wrote:Im waiting to post numbers until I get back on the dyno with my new equipment.....and SD tune **cough cough** Ryan, call me sometime to discuss **cough cough**

Lets just say, Ryans numbers on his old setup aka stock bottom end aint got much on me

But I will have something for you when I get this new one together I will give ya a call later John..



P&P Tuning
420.5whp / 359.8wtq

JUCNBST wrote:my ohv is currently putting down 0 hp.....kinda hard when the motor is missing alot of parts..... it rolls rather nicely though.

i am glad i am not the only one in this boat


____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.

Cavalier2000 wrote:

JUCNBST wrote:my ohv is currently putting down 0 hp.....kinda hard when the motor is missing alot of parts..... it rolls rather nicely though.

i am glad i am not the only one in this boat

I am too at the moment



P&P Tuning
420.5whp / 359.8wtq

ImPhat0260/Cavattack2000 wrote:

Cavalier2000 wrote:

JUCNBST wrote:my ohv is currently putting down 0 hp.....kinda hard when the motor is missing alot of parts..... it rolls rather nicely though.

i am glad i am not the only one in this boat

I am too at the moment

your looks prettier than mine though


____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.

ImPhat0260/Cavattack2000 wrote:

Cavalier2000 wrote:

JUCNBST wrote:my ohv is currently putting down 0 hp.....kinda hard when the motor is missing alot of parts..... it rolls rather nicely though.

i am glad i am not the only one in this boat

I am too at the moment

my project for the o1 has taken forever...and will continue to do so. I need to save up some cash to fall back on just in case the job goes south and I can make ends meet until I find another job.

John Benham wrote:

ecotecpower wrote:Its ok john, You can tell them you strive to break 200

SHHH!!!! dont let me secret out!!!

I'm not very good at keeping secrets though

Z, i don't have a LN2 so i don't have anything to offer in this thread but i'd love to see some pics of your S10 and info on it's set up.


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Skilz10179 wrote:Z, i don't have a LN2 so i don't have anything to offer in this thread but i'd love to see some pics of your S10 and info on it's set up.

well here u go man, sorry for the big pics

2000 s10 ln2 with 4l60e trans stock, only freshend up and painted before turbo
garret t3/t4 , front mount, custom made header, 42lbs delphi marine injectors and more lol

ohh yeah i forgot tuned by p&p tuning

What size are the primaries on the turbo manifold?

What did you put down with the s10? turbo specs? head work etc, etc....

MadJack wrote:What size are the primaries on the turbo manifold?

1 1/2"