Took the Cobalt to the track friday. Only got three runs in cause it started raining. Went with the ingalls as the only mod since the last time i went and it helped alot. With 28 psi, ingalls on 11mm, and Koni's on full soft I could launch at about 2600 and instead of the usually 2100.

1st run tried launching at 2100 like usually but bogged

60 ft---2.31
330 ft -6.43
1/8th-9.76
mph-73

2nd bogged launching at 2300

60 ft---2.34
330 ft -6.47
1/8th--9.80
mph-73

3rd lauched at 2600 and road the clutch, ZERO wheel spin, shifted early into second, bumped rev limiter into 3rd

60ft---2.28
330ft--6.36
1/8th--9.68
mph-73

I could defianlty have gotten into it little earlier the last run and pulled a better time. Going to IRP this tuesday to run on a 1/4mile finally. After some more practice launching hoping to run a 14.8 but will be happy with 14's. Mods are in my reg



2006 Cobalt SS 2.4L 9.6 @74mph 1/8th mile w/2.28 60ft

wait 28 lbs of boost or 28 lbs in the tires?

tires, its NA


2006 Cobalt SS 2.4L 9.6 @74mph 1/8th mile w/2.28 60ft

ooooohohhhhhhohohohhhhhohohohhhh.....ok

lol...not bad. A lot of the S/C'd ones with drivers who cant drive run that....or damn close.






5pointO

Not too shabby, I havnt gone to the track since I owned the Z24 Vert.
My best time was 10.3 with an intake.

I like the SS but still would rather have the blower.







How many steps to heaven, Doc?
...Ah, metaphysics.