ive had some trouble even finding it any good websites for this



1989 Turbo Trans Am #82, 2007 Cobalt SS G85

Patriot Stage II head for 1,095+25 shipping


13 psi and climbing......

Matt, we talked before, reach Hypsy and he'll also help you get the right head gasket as well.



www.kronosperformance.com / 732-742-8837

unfortunately the price from that site cannont be correct. considering there is a $250 core charge on the head. either way you should order it from me just about the same cost.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

i want the stage II with the redone valvetrain stuff



1989 Turbo Trans Am #82, 2007 Cobalt SS G85

well even though i bet i get in trouble for doing this...this is the cost that i gave NJHK...should be able to get it for everyone else as well.

1095 for the head plus 30 for shipping and 250 for the core charge. that is about as low as i can go. that is for the stage 2 head w/o cams.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

Hey Hypsy i got a question for you, NJHK pointed This Head out to me awhile ago, and i was wonderin if i collected all the parts (+1mm valves, roller rocker set, ect.) if i could send them all the parts including a head, if they would P&P and do everything for the new valves and install the other stuff... i havn't contacted them yet cause i am still paying for other things, but you sound like you might know about what i am lookin at price was...



http://www.cardomain.com/id/oyyci
http://photobucket.com/albums/d170/Oyyci/

what company exactly are you representing



1989 Turbo Trans Am #82, 2007 Cobalt SS G85

John H [Cavalierkid wrote:]Patriot Stage II head for 1,095+25 shipping

that's just the head with no valve train.

matt: im working for my bosses company... Schwartz Extreme Performance

Oyyci: no...you can buy the head bare and then assemble it yourself but from past experience they wont build it using your parts. probably because then they dont know the quality of the parts youve chosen.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

^alright, maybe it will be cheaper for me to find an engine shop local and just have it done there, i don't know much how to assemble it, and pry the best person to help me would pry be PJ (the flying squirrel) and hes all the way in NJ i'll figure somethin out

thanks for your help



http://www.cardomain.com/id/oyyci
http://photobucket.com/albums/d170/Oyyci/

you could get the stuff and send it to us....my boss is a master engine builder. He built the engine in the caddy, GTR, and Hemi Dart from that website i linked to and helped his son build the motor for the TA on there



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

that's something i'll keep in mind, i kinda wanna find someplace local or someone local so i can watch and learn how to do it, but if all else fails, about how much you think i would be lookin at if i would send it to you guys?



http://www.cardomain.com/id/oyyci
http://photobucket.com/albums/d170/Oyyci/

probably right near their cost...maybe a little more. ill ask tomorrow when i go in



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

summit has it to

# PAR-2041


13 psi and climbing......