this might not be in the right forum. but for all you eco guys out there with oil pressure guages...where is the oil pressure sensor to install the guage?

there's a bunch of unused oil taps all around the engine. 3 on the front under the intake manifold, one on the driver's side of the engine under the unused EGR passages, and a few more on the backside by the exhaust manifold

you'll notice them when you see the allen-key plugs. I'm not sure what size they are, maybe someone else could chime in on that one...

i was hoping you would answer that.. your car inspires me to build an all motor ecotec! so in your opinion which one is the best to use?

can someone tell me which one would be the best to use...

any of em would be fine doesn't really matter, whichever one you wanna use

just be sure to use some teflon on there so she doesn't leak


and thanks for the compliment!
any Qs about all motor stuff feel free to ask

yea i know to use teflon on them. i used to have a 01 z24 that i had aan oil press. guage in. and dude no prob on the compliment. i was just reading in your other thread about the axle you snapped...thats pure INSANITY dude!!