Tried out my Jasper jig tonight and i'm sold lol

Now I was using my Dad's old router which he said he got back in college which was back in mid 60's and I was born in 80

its a fixed router which means once you tighten it thats it it is a bit of a pain to adjust and it doesn't really go as deep as most so I had to flip the wood which is fine









I spent most of the time trygin to figure this router out and plus since I work will 8, so I only got a big pancake cut out lol



Z24 Cardomain Site ll ZQ8 Car Domain Site

Yep, those are awesome. I made my own for at home out of 1/2" Plexi.






^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum

Damn, I'm still using a compass and jigsaw...

wysiwyg wrote:i would say they bang, they don't really pound so much. but if
you want to bump, then they will bump and hit real hard and a lot good.

LOL

when cuttign rings with this jig the inner diameter will be right but for the outer portion you need to add a half inch



Z24 Cardomain Site ll ZQ8 Car Domain Site

For outside cut of circle rings measure from the inside of the bit, and for inside cut of circle measure from the outside of bit. That's where I kept making mistakes and actually engraved it into my jig so I don't forget each time I use it. I think that may be the problem.






^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum

Mennitti wrote:For outside cut of circle rings measure from the inside of the bit, and for inside cut of circle measure from the outside of bit. That's where I kept making mistakes and actually engraved it into my jig so I don't forget each time I use it. I think that may be the problem.

nah the inside will be fine the Jasper is setup for measurements of the hole itself so the hole i cut is 13.5 inches in diameter but my piece of wood that was cut out is 13 inches so whenever cutting rings I need to make my system .5 inches bigger than needed



Z24 Cardomain Site ll ZQ8 Car Domain Site

good deal Geeds, cuz im in need of some rings


ps - love the FTMFW, lol!!!!!!

damn you ive been looking everywhere for that thing!! where did you find it? all the online places ive looked its sold out..phil

picked it up at my local parts express

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=365-250 says sold out online not sure at the physcial store but I picked mine up last week

says they should have some in on the 23rd




Edited 1 time(s). Last edited Wednesday, January 17, 2007 10:19 AM


Z24 Cardomain Site ll ZQ8 Car Domain Site