Kinda of a dumb question, but was wondering where to buy these from? I'm looking for the ones that come on the stock and LS models. Mine didn't come with them, so I'd have to cut the circles out of the bumper and what not, so thats not the issue, but I can't find the lights. I don't know their part number, so I can't exactly search on GM. Anyone have an idea of cost or what not or where I can get them?
junkyard or ebay is your best bet
gm lol
__________________--------------------------____________________
Team: NONE RIGHT NOW
Sponsored By: Pro Trucks
Work Being Done By: creative customs
Stuff for Sell:
Well, I checked GM and came up with nothing. Unless I was searching wrong? Also, I was searching Ebay and came up with nothing for 03-05? Did they change them from 00+, or are they the same ones?
As for aftermarket ones, I was checking some out at pepboys, but they have a ton of sizes. Do I need a specific size, or is it just one of those see if it fits kinda things? lol
if you're just cutting holes in the bumper, you can get them any size you want...
GO PATS!!!
Well my Cavy is the 05, so I have the premade holes in the bumper. its just the 03-05, when you don't have fogs, they have what looks like a vent in where they go. So you just have to use a dremel or something to cut out those vents. Other then that, the holes is the same hole the stock fogs would go in. Thats why I'm wondering.
oh ok.
they're probably the same size as the 02's.
GO PATS!!!
if anything, you could get small one's and mount them in the lower part of the grill under the license plate to avoid cutting on your car.
GO PATS!!!
well i was loking and found them on gmpartsdirect.com
for like 40-50 a side...
them part number is the same for the 2000'-2005
here is the part number # 226222589 cost $56.35 a side + s/h
front facia is 12335629 cost is $223.67 + s/h
goodluck.
OEM CAMBER/CASTER KIT 10 People for $210 <P>
GOT ECOTEC?
while it look like the whole is in your bumper
there is nothing here to hold the stock driving light
the 00-05 lights are all the same , and they actually mount to the bumper cover on the Z24/LS sport models
Wow, over $120 or so for the harnesses and what not. Thats a lot for foglights? I planned on mounting them straight to the bumper, and then just wiring them into the headlight harness, so I wouldn't need a seperate switch. With that said, wouldn't I just be able to buy the ones from the ProCarPart, put bulbs in them, wire them up and be good to go, or is it a tad more complicated?