anyone know how to install a 5" tach from autometer?
ASSUMING we talking about a DIS system
Black = ground
Red = splice into your dimmer switch wire
Yellow ( I think) for the output for the CKP signal from the PCM
someone correct me if I'm wrong there, I dont see anyway to get the RPM siganl but from the output signal from the PCM,
- 2004 Cavalier - 124k, owned since new
i know this is old but i was wandering where exactly do i connect the tach signal wire to
me and i wrote:i know this is old but i was wandering where exactly do i connect the tach signal wire to
Okay you need a wiring diagram of the input to the PCM. You need to splice into the input wire for the PCM.
- 2004 Cavalier - 124k, owned since new
I can point you in the direction of a wiring diagram if you tell me the year and engine of your car.
Rob
Sold 2/2/05
how about a 97 sunfire gt
accourding to rksport he will need tach driver adapter or what ever they call it
friends dont let friends roll stock
