so what size are the stock lug nuts? i was about to order new lug nuts but the key has two different socket sizes- 3/4 and 13/16

which one is ours? or is ours a different size?


Land Pirates sail the open roads
DISCLAIMER: If anything I say offends you, I don't care..wear a helmet. Also, the information
I post is what I know to the best of my knowledge. If I am wrong, please correct me so that
others as well as myself may learn.
Premium sinc 6-17-04

when you order new lugs, get 12x1.5 and the lugs you buy usually come w/ a key.

sorry, lemme rephrase-

the other end of the key- the side that you put into a socket- im tryin to get a key with the same size socket end as the stock


Land Pirates sail the open roads
DISCLAIMER: If anything I say offends you, I don't care..wear a helmet. Also, the information
I post is what I know to the best of my knowledge. If I am wrong, please correct me so that
others as well as myself may learn.
Premium sinc 6-17-04

stock ones are 19mm or 3/4 when you can't find it. 19mm is tighter so it doesn't damage the nuts as much as a 3/4 with an impact gun.



Gilles
2.3 Ho

thank you sir!

now i can go get me a torque wrench and a socket to keep in the car


Land Pirates sail the open roads
DISCLAIMER: If anything I say offends you, I don't care..wear a helmet. Also, the information
I post is what I know to the best of my knowledge. If I am wrong, please correct me so that
others as well as myself may learn.
Premium sinc 6-17-04

im still confused. why would it matter? use the key it comes w/ and get a torque wrench. if you have sockets at home, find the one that fits the key. thats all i do. i dont know why you would need to know the stock size unless you plan on using the stock bar it comes w/ to get the lugs off