Pardon my sudden noobishness but can someone post a clear pic of the brake booster line for the 2200? I don't know where to find it or what it looks like.

I searched this forum and looked in my Haynes manual and turned up nothing.

I'm planning on running Sea Foam through my system before my next oil change and I would like to use the booster line method in order to feed it into my engine.

We seem to get a lot of Sea Foam posts in this forum, it probably wouldn't hurt to have pics that people like me can reference.

Thanks in advance.







"Eagles may soar, but weasels don't get sucked into jet engines." -- Steven Wright

u mean the vacumm line going to the booster?


-Borsty

^^ That's it





"Eagles may soar, but weasels don't get sucked into jet engines." -- Steven Wright

just follow it from the booster............


-Borsty

If you can find the resevoir to fill the brake fluid, look directly behind that, about 3 or 4 inches down and to the left on the firewall. There is a large vacuum line going directly to the throttle body/ intake manifold. That's where I poured mine in at.