prothane tranny mounts - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
prothane tranny mounts
Tuesday, June 14, 2005 9:20 PM
wanted to know what you guys think about these mounts are they worth getting i have the upper and lower motor mounts and i was wandering if these tranny mounts will work well with my setup

Re: prothane tranny mounts
Tuesday, June 14, 2005 10:54 PM
they are worth getting







Re: prothane tranny mounts
Wednesday, June 15, 2005 6:24 AM
No car in registery....

And like 97cavie24ls told you, yes they worth all the pennies they cost. If you got motor mount you will be an happy camper.
Re: prothane tranny mounts
Wednesday, June 15, 2005 7:11 AM
yes worth any penny. Tranny shifts better with it now.


---------------------------------------------------------------------

My Car Specs
Club J-Body Montreal Forums
Re: prothane tranny mounts
Wednesday, June 15, 2005 9:30 PM
For the price, it's worth getting. Every little thing helps...



www.kronosperformance.com / 732-742-8837

Re: prothane tranny mounts
Wednesday, June 15, 2005 9:54 PM
yes.... definetely worth getting. car shifts smoother and any bit helps with wheel hop...



Re: prothane tranny mounts
Wednesday, June 15, 2005 10:14 PM
Does anyone make them for auto's yet?



Re: prothane tranny mounts
Thursday, June 16, 2005 4:23 AM
C R J ( The Drew Carey One ) wrote:Does anyone make them for auto's yet?


Sad to say but I highly doubt it...



www.kronosperformance.com / 732-742-8837

Re: prothane tranny mounts
Tuesday, June 21, 2005 6:25 PM
How hard are they to install?



Re: prothane tranny mounts
Tuesday, June 21, 2005 7:12 PM
1 front 1 rear.

I didnt installed mine but I heard alot the REAR is a pain in the ass to change.


-----------------------------------------------------------------

My Car Specs
Club J-Body Montreal Forums
Re: prothane tranny mounts
Tuesday, June 21, 2005 7:27 PM
anyone else who installed theres, how hard was it? how long for an install?




Re: prothane tranny mounts
Tuesday, June 21, 2005 9:50 PM
rear one is a pain...i rate it at about the same ast he upper and lower engine mounts..cus the front mount was easy but the back one is kinda harder to get to


THE GUY SURE LOOKS LIKE PLANT FOOD TO ME!!!

Re: prothane tranny mounts
Tuesday, June 21, 2005 10:18 PM
What is involved in doing this and about how much time is involved? I would like to do both motor mounts and tranny mounts, but would like to know a level of difficultness ona scale of 1-10. My dad is a mechanic though so im thinking a couple of free cups of coffee might be enough to persuade him to persue it.



Re: prothane tranny mounts
Tuesday, June 21, 2005 10:53 PM
the hardest part is getting the mounts on and off the car (particularly the back one as stated above) 3 bolts hold each mount to the frame and then one bolt holds each mount to the tranny. once they are out it's fairly simple, bend the tabs, press the old bushing out, press the new bushing in and reinstall. i'd say 1-2 hours tops for somebody who is mechanically inclined.



Re: prothane tranny mounts
Tuesday, June 21, 2005 11:03 PM
C R J ( The Drew Carey One ) wrote:Does anyone make them for auto's yet?


have not heard anything yet.



Im a Xbox 360 fanboy...and damn proud of it!!
Re: prothane tranny mounts
Thursday, June 23, 2005 6:55 AM
doesn't Karo have them for Automatics?



Re: prothane tranny mounts
Thursday, June 23, 2005 9:36 AM
they are not out yet for us autos


they are in the works though







Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search