Does anyone know where to get a set of roller rocker arms for a 97 2.2?
Summit Racing part number CCA-1414-12 (this is a full kit including rocker arms, studs and pivot balls). It's cheaper than buying a set of 8 individually. Then you need to go to the GM dealership and order 8 rocker studs, the part number is: 476530.
I was a retard, and now I'm permanently banned.
although this has been covered a few times
here is a very very informative link from Ny J-body
http://www.ny-jbodies.org/library/engine/2.2/2.2rockerarm.htm
roller rockers are my favorite mod to date, they made driving my sh!tty lil' 2.2L OHV more fun.
<a href="http://www.cardomain.com/id/fireside"><img src="http://www.influx.ca/avatars/stevefiresig.jpg"></a>
syn13 wrote:and this will bolt on
with the correct studs (listed above) yes the roller rockers will work with your stock pushrods.
I was a retard, and now I'm permanently banned.
BRAIN F@&+!...............
Sorry those humbers on the studs wont work on the Comp Cams rockers, the tops are SAE not metric. Those studs will allow the use of any narrow bodied rocker from a Small Block Chevy with the center bolt valve covers.
MadJack wrote:BRAIN F@&+!...............
Sorry those humbers on the studs wont work on the Comp Cams rockers, the tops are SAE not metric. Those studs will allow the use of any narrow bodied rocker from a Small Block Chevy with the center bolt valve covers.
no worries, i got him pointed in the righht direction.
I was a retard, and now I'm permanently banned.
