im new to the performance thing please help - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
im new to the performance thing please help
Sunday, July 31, 2005 7:19 PM
i have 98 sunfire gt and i have the secret cam swap thing going. i have the cams now.
what i need to know is what else should i change on my car to make this run right.
my car is knocking a little so if the knocking is coming in from there might as well change what is needed. this is what i got and what i am going to do. so let me know of stuff that im am missing or what you recommend i should do.

1. im getting a port and polish done.
2. oversized (1mm) valves. (carcustoms) do i need the guides, lifters, springs?
3. crank and alt pulley (rsm)
4. motor mount (upper and lower) (rksport)
5. tranny mounts (rksport)
6. strut bars (front and rear) (dont remember they are on their way)

thats pretty much what i got but i know that by me getting different valves i would need something else and that what im hoping for everybody to answer. yes i have searched and it still doesnt answer my question it just gives me performance parts and all but it doesnt tell me what else i should do with certain stuff.
hope someone can reply

Re: im new to the performance thing please help
Sunday, July 31, 2005 7:45 PM
new camshaft, pistons maybe?


AkA joe m.

Ricer ELIMINATOR!
Re: im new to the performance thing please help
Sunday, July 31, 2005 8:32 PM
lifters.

also the p and p will increase the combustion chamber size. This lowers the compression ratio. This will decrease your horsepower. not a lot though.


My Car
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search