how do i put this on a 2.4l sunfire gt? im clueless where do i put it?




Ryan

im hoping for pix if possable




Ryan

do you already have one?

if you have one it comes with instructions


by shift improver im guessing your talking about the B&M shiftplus? if you dont have one lemme know i have one for sale

yeah i have one the instructions are odd they are taliking about trucks....




Ryan

should of gotten the Autotrans interceptor. its a plug and play kind of thing



Im a Xbox 360 fanboy...and damn proud of it!!

yeah... but i got the cheap one so i need help haha




Ryan

99redz24 wrote:should of gotten the Autotrans interceptor. its a plug and play kind of thing

Agreed

Quote:

yeah... but i got the cheap one so i need help haha

You get what you pay for...

Well I'll help you out, this is copied of a thread that gives instructions on how to install the B & M Shift Plus:

LittleBill wrote:Well people seem to still have alot of problems with installing the ShiftPlus.... why i don't know so i went outside and i took pictures, the directions are below and pictures, u don't really even need the install directions if u look at the pictures, also if u can 't install it after this post then u really need to take your car to a professional,also the connectors used below did not come with the shift kit, these are called tap splices, which i got from home depot. so u now have everything lets hope its all u need.

TO INSTALL SHIFT KIT #70380 AT TRANNY... 2 MINUTE INSTALL: this install was done on a 98 2.2l 4 speed auto, this connector is found in the front of the transmission to the left of the battery, and to the right of the header, it is gray and circular, it is about 6 inches down from the red tranny vent plug, thats says trans, it is 2 inches in diameter, the wires u are connecting is the black wire to the lt blue with white stripe, now the other red wire you want to install to is the red wire with black stripe this wire is directly underneath the light blue one, not the one to the right of it, which is another red with black stripe wire, which has a dark blue wire underneath, look at the connector with the white arrow at 180 degrees, any problems let me know, i get no engine lights, and my ets off light doesn't come on like some people have had problems with stage II.

Don't say I never did anything for you

Good luck with the install...



www.kronosperformance.com / 732-742-8837

thanks alotthanks alot i just checked up on this post and i got it done in 2 mins it works good




Ryan

Ryan Frank wrote:thanks alotthanks alot i just checked up on this post and i got it done in 2 mins it works good

You're welcome...good luck with the shift plus



www.kronosperformance.com / 732-742-8837

now go back, take off those stupid crimp connectors, and solder the wires in properly before you get moisture and whatever else into the wiring to cause corrosion and eventually electrical/mechanical issues.




Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said