full exhaust - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
full exhaust
Thursday, January 12, 2006 6:04 PM
now if i go with 2.25 setup all the way from header to muffler, where my muffler would be 2.5... would it reflect on the performance? should i get the 2.25 one ? what do you guys think?

Re: full exhaust
Thursday, January 12, 2006 6:29 PM
no it wouldn't effect the performance at all. do whatever you think is best.


Re: full exhaust
Thursday, January 12, 2006 9:18 PM
It won't effect it. Your exhaust system is only as big as your smallest point...if you have a full 2 1/4" system, that muffler won't make any difference but I personally would try to keep everything the same size.



www.kronosperformance.com / 732-742-8837

Re: full exhaust
Friday, January 13, 2006 8:07 AM
not to thread jack but anyone know the size of the downpipe on the pacesetter and weapon r headers? Also I will be boosting later down the road so should i get a 2.25 or 2.5 exaust? (not sure yet if it will be turobed or sc'ed)


~Riki

SPONSORED BY: No one!
Car Domain Site
Re: full exhaust
Friday, January 13, 2006 8:28 AM
^^^ They are 2.25" at the end and I think the pacesetter is 3" at the collector. If you are going turbo their is no point to the header tho.

To the original poster, it will not affect it but as NJHK said I would keep it the same size to.


2012 HD VRSCF
2010 Ford Explorer
2006 Ford Ranger
2004 Chevy Cavalier
Re: full exhaust
Friday, January 13, 2006 8:30 AM
Riki Knight wrote:not to thread jack but anyone know the size of the downpipe on the pacesetter and weapon r headers? Also I will be boosting later down the road so should i get a 2.25 or 2.5 exaust? (not sure yet if it will be turobed or sc'ed)


The collectors on the Weapon-R is 2 1/4", I want to say Pacesetters is 2 1/2" or 3".

Turbo or Supercharged, 2 1/2" would be more suitable.



www.kronosperformance.com / 732-742-8837

Re: full exhaust
Friday, January 13, 2006 8:42 AM
I'm thinking of going turbo but it wont be for a year or 2 so i have no problem dishing out the money for a header. I already know someone who said that they would buy it from me if I did turbo it.


~Riki

SPONSORED BY: No one!
Car Domain Site
Re: full exhaust
Friday, January 13, 2006 9:11 AM
I meant at the end...not collector



www.kronosperformance.com / 732-742-8837

Re: full exhaust
Friday, January 13, 2006 3:38 PM
What if turb or supercharged are still a looong way down the road, would 2.5" exhaust be too much on a stock engine? Or would it really matter all that much, either way it'd be a little "stronger" than a stock exhaust?
Re: full exhaust
Friday, January 13, 2006 3:45 PM
^^^ That was my point


~Riki

SPONSORED BY: No one!
Car Domain Site
Re: full exhaust
Friday, January 13, 2006 5:08 PM
My bad, I thought your point was more along the lines of the having the header if you were going turbo down the road. I'll have to read closer next time.

Re: full exhaust
Friday, January 13, 2006 8:47 PM
Ty W wrote:What if turb or supercharged are still a looong way down the road, would 2.5" exhaust be too much on a stock engine? Or would it really matter all that much, either way it'd be a little "stronger" than a stock exhaust?


You'll just lose some low end power compared to if you had a 2 1/4" exhaust.



www.kronosperformance.com / 732-742-8837

Re: full exhaust
Saturday, January 14, 2006 3:08 PM
the shop will just expand the 2.25" piping to 2.5" to mate with the muffler. no biggie. i went from 2.5" pipe to a 2.25" muffler and they just expanded the muffler. quarter inch is ok

14.82 @ 97 mph
Re: full exhaust
Saturday, January 14, 2006 3:12 PM
the pacesetter b-pipe is 2.25", just for the record


Ill make a sig someday
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search