ok. to put the upper mount insert in can i just put a jack under the motor, pull the mount off, replace the insert, and put it all back together. or is there a different way i need to do this
Put a large chunk of wood (2x4 1' long) between in the oil pan and the jack, just to be careful.
????? why do you need to jack the motor up????
Take the plate off the mount and remove the insert, put in the polly insert along with the stock rubber insert and put all the bolts back in, your motor wont fall.
sorry to jack the thread but you gonna come to our Dyno day in lexington LD9 Fury?
