I've honestly gone everywhere in my town tryin to find these. Where can I get them or can someone just buy them and send them to me and I'll paypal them the money.
What are these for? I have tons of extra parts laying around, but I don't know any of the measurements... I just have a vague idea of what goes in which hole.
its for the Ho intake manifold swap its the two bottom studs that hold the manifold on
you dont REALLY need them, hell i have only 4 bolts holding my manifold on.
But you can get them from small autopart stores. They should have them or they should be able to get them for you.
Click the banner to enter the best Quad4 & Twin Cam site on the internet.
Man Ive been looking for these things as well the WHOLE winter.. I found the 60mm bolts, but not the studs.. Ive been everywhere in town looking for the damn studs.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
and your still lookin? my town is @!#$ I've gone to 8 different "parts" stores that don't have the friggin studs.. Like I said if someone can get them for me I will gladly pay you for them
^^^Lol yes im still looking.. I was thinking of just buying 2 more 60mm bolts and cutting the hex head off lol.. *BAM* instantly a stud hehe
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
i used bolts in all of mine
^^^ me too. bolts everywhere...
WHITECAVY wrote:Man Ive been looking for these things as well the WHOLE winter.. I found the 60mm bolts, but not the studs.. Ive been everywhere in town looking for the damn studs.
Why don't u just go to the dealer if u have that amount of time. or use bolts.
the studs can't be too much... or maybe they can. but at least check it out. I've been surprised sometimes at how much some things cost at the dealer. Sometimes it' a good surprise, sometimes, not so good. haha
Ya went to the dealer same @!#$ they can't order it. i didn't know you can use bolts all around.
Also a Autoparts Source store opened today they can order them too
But if you can use bolts then I'll just do that.
I'm guessin you use the same bolts all the way around.
yes , same 1's all around
haha that makes me mad that I never knew that
The dealer told you they couldn't order it? I doubt it. They just didn't want to. The 2.3/2.4 isn't that old.
James Cahill wrote:The dealer told you they couldn't order it? I doubt it. They just didn't want to. The 2.3/2.4 isn't that old.
you do understand that these studs arent the stock length so they really have nothing to do with the 2.3/2.4.
Click the banner to enter the best Quad4 & Twin Cam site on the internet.
Damn, didnt even think to use bolts all the way around.. Deerrrrr lol.. Thanks. Ill do that as well when I swap engines.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
