AEM WAI install - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
AEM WAI install
Tuesday, April 18, 2006 6:15 PM
there is a hose that says it has to be installed on the side of the block, is that below the power steering fluid box? There is alike two hook-ups where one is already hooked up to something. Is that the right place?
much appreciated

Re: AEM WAI install
Tuesday, April 18, 2006 6:26 PM
On mine, there was a hose that came from just below the intake manifold. I have an ebay intake that had an inlet on it for this hose. That hose should have been connected to your stock tube before.


02 Subaru Impreza WRX Wagon

Re: AEM WAI install
Tuesday, April 18, 2006 6:55 PM
i forgot to tell you my car is a 1999
Re: AEM WAI install
Tuesday, April 18, 2006 7:26 PM
also I had another intake in which did not have an inlet hose, so I really have no idea where it goes
Re: AEM WAI install
Tuesday, April 18, 2006 7:34 PM
It hooks up under the intake manifold. I have a 1999 Z24 also with the AEM intake and that is where it goes. The hose they sent with the kit was the wrong size (1/2") and i needed 5/8" instead so you may need to purchase a dfferent hose. Good luck.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search