I just installed the ecotec upper and lower motor mounts. Does anyone know if there is a certain torque specification for the two upper bolts on the upper mount? I cranked them on pretty good but I just want to make sure. Thanks
I'm sure there is an actual tq spec, but i've never used a tq wrench on them and never had any problems. Just tq down as much as you can with a normal 1/2" socket wrench.
FstCavZ24 (Turbo ECO) wrote:I'm sure there is an actual tq spec, but i've never used a tq wrench on them and never had any problems. Just tq down as much as you can with a normal 1/2" socket wrench.
werd.......just tighten them by hand or if you have an impact just hit it with that....
