well winding down closer and closer to getting tuned and am looking to get some bigger injectors Questions are the above.
- i hear that the 42lb greens are short so you need to use the second groove or something on the 2.4 rail to make them fit?
- to swap these in what are all the parts ill need
- what model and years can i find these in?
thanks guys.
I have them on my car...... no fitment issues at all. I picked them up off ebay from this guy .
clicky them come stock on the ford svt lightning truck. you can also buy the injector clips new from here
clicky or you can go to a junk yard and find a fox body mustang i believe have them and some gm vehicles too. I dont remember exactly what cars have them so you may have to search if you want to find them cheap
BOOSTED (The Untuned Demon) wrote:- i hear that the 42lb greens are short so you need to use the second groove or something on the 2.4 rail to make them fit?
You are correct. All you have to do is slot the mounting holes on the rail to push it closer to the head. I had to do this to get them to work properly with my engine.
I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">
I never sloted them on mine or anything they fit just fine for me
Mr. Pute wrote:BOOSTED (The Untuned Demon) wrote:- i hear that the 42lb greens are short so you need to use the second groove or something on the 2.4 rail to make them fit?
You are correct. All you have to do is slot the mounting holes on the rail to push it closer to the head. I had to do this to get them to work properly with my engine.
Mine clipped right on, no slotting or special changes, just plug and play (apart from changing the clips)...
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
How much hp will the 42# injectors support and what is the conversion when they're rated in cc/min?
What size injectors are needed to make 450 -500 hp at the flywheel?
2000 Z24 5spd header & catback for now.
what type of injectors should i use on my ecotec turbo
This is kindof off topic but are the SS supercharged cobalt injectors bolt on? Whats their flow rate and impedence? They come on a boosted car so i think they should work. Just my .02
Shawn M.
PSN ID: Phatchance249
42#s will support more HP than 99% of this website ever reaches and thats around 300whp or more
as for specs on cobalt injectors they are pretty much identical to the saab 9-3 they are 12.0ohm and 370cc
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
