now i have all the bolts...i bought the whole kit already setup and ready to go....i just gotta figure out which bolts go 2 wat.....

heres wat i have

6 - 2 1/2 inch bolts.....2 of them only screw in half way

3 - 2 inch bolts which all screw in all the way

2-- 2 1/2 bolts which have the middle part blocked and have room on both sides to screw in and 2 bolts which i guess go on one side of these

EGR plate and gasket and 3bolts to hold it on

2 feet of vac hose

manifold and 2.3 TB

where do all these bolts go.....and wat if anything am i missing....i kno im gonna need brake booster line......

im trying to put this on tommorow any help is greatly appreciated

you scratch my ride IMA EAT YO CHILDREN

ok narrowed it down......now wat r the 32 bolts that only half screw in used for??

you scratch my ride IMA EAT YO CHILDREN

the 2 bolts not 32

you scratch my ride IMA EAT YO CHILDREN

where did you get all these bolts from? You only need to buy 6 for the manifold (only if your using a transition flange). Other then that, all the bolts already on the car will work just fine.



Click the banner to enter the best Quad4 & Twin Cam site on the internet.

i hate when you guys just put "HO install" on the subject...its misleading makes me think you actually had the ballz to swap in the HO motor...but of course you didnt hehe