Hi, newbie here.

I know my questions have most likely been answered some where( did some searching and only found partial info)

I'm in the process of replacing my 2.4l in my '01 GT(toasted btm end) with the 2.2 Eco. What I'd like to find is a pin out for the '01 ecu to locate my cruz curcuits as the Haynes manual is a little hard on the eyes! Also is there any changes to the pin out between the '04 and '05 ecu's (I printed off john beers '05 ecu pin out post in another thread)?

J-bodies are new to me as I'm used to working on 81-88 G-bodies (own/rebuilding a 86 Monty SS)

Any info will be apprieciated!

Gord

get the engine harness from the eco with the trans your going to use , and its all plug and play

it cant get any easier

[quote=97trd(???™)]get the engine harness from the eco with the trans your going to use , and its all plug and play

it cant get any easier

Thats not really what he's asking...

What part of your cruise are you trying to find? It really doesn't plug into the ECU harness...





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Hi Shifted,

The pin-out I printed off shows j1-25 as cruise engage and j2-11 as cruise disable for the '04 ecu. The donor car wasn't equiped so I have to do some splicin'. I'm good with wrenches, but with wires (other than I.C.E.), I'm a little shady, so I wanna be carefull with this.

Thanx,

Gord