Lets say I have to move my car from point "a" to point "b" and it's about a 50km drive, and i'm using 550cc injectors and my car isn't tuned yet... can I increase the resistance of the injectors(high impedence) to shoot out about 60% of normal? I don't have hptuners yet and car has to be moved. it's currently running on open loop and I could have it running off of my wideband 0-1v. I don't intend to run the car longer than that, but it's pretty much all hiway driving and I don't want to have my cylinders flooded the whole time. I have an adj. fpr to set my fuel idle. I'm not that sure of how the injectors work. but I would know how to wire them in.
____________________________
Dracula called, and he's coming tonight!
If I have any problems, I could just call a tow truck. lol
thanks for the reply. I didn't really know if it pulsed on current or volts.
____________________________
Dracula called, and he's coming tonight!
as long as your not dumping in so much fuel that it's putting out the spark there's no worries with just moving it around, you'll get crappy crappy gas mileage and very very poor performance and a nice high from the smell of raw fuel in the exhaust
. but you should be fine.
