The Performance Part Sources Thread - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
The Performance Part Sources Thread
Monday, October 01, 2007 3:54 PM
this is by no means complete... i worked on it here and there while at work... im about to leave for the day so imma post what i have so far ... (i didnt get to finish categorizing NOPI)... Please Please Please add to this list so we can have one thread of places to go to get parts !!!!

----
Engine Part Sources

First Generation. I don't know too much about these... anyone care to fill it in
1.8 OHV
-
1.8 SOHC N/A
-
1.8 SOHC TURBO
-
2.0 OHV
-
2.0 SOHC N/A
-
2.0 SOHC TURBO
-
2.8 V6
-

Second Generation
2.0 OHV
-
2.0 SOHC N/A
-
2.0 SOHC TURBO
-
2.8 V6
-
2.2 OHV
Mounts:
-Make Your Own Mounts How-To (by Dave Starr)
-J Body Performance (all four)
-Fast Forward Performance (dogbone)

Exhaust:
-RSM Racing (single and dual cat-back systems)
-Mantapart (cat back with out muffler)

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance

Throttle Body:
-RSM Racing

Header:
-PaceSetter
-OBX Racing Sports

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

3.1 V6
Underdrive Pulley:
-Fast Forward Performance


Third Generation
2.2 OHV
Mounts:
-J Body Performance (all four)
-Fast Forward Performance (dogbone)
-RK Sport

Intakes
-RK Sport
-NOPI

Exhaust:
-RSM Racing (single and dual cat-back systems)
-Mantapart (cat back with out muffler)
-RK Sport
-NOPI (Magna-flow + Pacesetter + NOPI by Borla + RK Sport + DC Sports)

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-NOPI (Python/Venom)

Throttle Body:
-RSM Racing

Header:
-PaceSetter
-OBX Racing Sports

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

Fuel Regulators/Pump
-RK Sport
-NOPI (Python/Venom)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce + Exedy)

Ignition
-RK Sport
-NOPI (Nology)

Cooling
-RK Sport

Internals
-NOPI (Eagle Rods)

Nitrous
-NOPI (Nitrous Express)

PCM
-NOPI (Python/Venom)

Short Shifters
-NOPI (B&M)

2.2 "2200" OHV
Mounts:
-J Body Performance (all four)
-Fast Forward Performance (dogbone)
-RK Sport

Intakes
-RK Sport

Exhaust:
-RSM Racing (single and dual cat-back systems)
-Mantapart (cat back with out muffler)
-RK Sport

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance

Throttle Body:
-RSM Racing

Header:
-PaceSetter
-OBX Racing Sports

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

Fuel Regulators/Pumps
-RK Sport

Clutch/Flywheels
-RK Sport

Ignition
-RK Sport

Cooling
-RK Sport

2.3 Quad 4 DOHC
Mounts
-RK Sport

Intakes
-RK Sport

Fuel Regulators/Pumps
-RK Sport

Pullies
-RK Sport

Clutch/Flywheels
-RK Sport

Exhaust
-RK Sport

Ignition
-RK Sport

Cooling
-RK Sport


2.4 Twin Cam DOHC
Mounts
-RK Sport

Intakes
-RK Sport

Fuel Regulators/Pumps
-RK Sport

Pullies
-RK Sport

Clutch/Flywheels
-RK Sport

Exhaust
-RK Sport

Ignition
-RK Sport

Cooling
-RK Sport

Internals
-RK Sport

Short Shifters
-RK Sport
-NOPI (B&M)


2.2 Ecotec DOHC
Mounts
-RK Sport

Intakes
-RK Sport

Fuel Regulators/Pumps
-RK Sport

Pullies
-RK Sport

Clutch/Flywheels
-RK Sport

Exhaust
-RK Sport

Ignition
-RK Sport

Cooling
-RK Sport

Internals
-RK Sport

Short Shifters
-RK Sport
-NOPI (B&M)

---------------------
Those of you with 2.3 DOHC and 2.4 DOHC engines. There is also GM Parts available for your motor.
Some of these can be purchased at the Parts Store (like Advance, Autozone, NAPA, dealer, etc), some will have to be purchased at the bone yard.

2.3 HO Intake and Exhaust Manifolds
2.3 HO Lifters
2.3 HO Secret Cam Swap
2.3 LO Secret Cam Swap (for those of you with 2.4s)
2.3 HO Oil Pump
the heads between these motors are interchangeable as well (with some work)... not for inexperienced tuners.

------------------
Again this is by no means complete... please add to it if you can...



Edited 1 time(s). Last edited Monday, October 01, 2007 4:00 PM



Re: The Performance Part Sources Thread
Monday, October 01, 2007 4:43 PM
RSM Racing is long gone.

Add Ebay to just about every category

...j



Re: The Performance Part Sources Thread
Monday, October 01, 2007 4:48 PM
What about AEM? They have some pullies and intakes.


Re: The Performance Part Sources Thread
Monday, October 01, 2007 4:55 PM
thats as far as i got before i left work... im about to start back to adding to it...



Re: The Performance Part Sources Thread
Monday, October 01, 2007 5:18 PM
Also, we make the most complete line of mounts for the J-body... www.TurboTechRacing.com

SPEC is a really big brand for J-body clutch kits as well



-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Re: The Performance Part Sources Thread
Monday, October 01, 2007 5:58 PM
Aaron: Which motors do you make mounts for so i can add where appropriate...

theres 1.8 OHV, 1.8 OHC, 1.8 OHC TURBO, 2.0 OHC, 2.0 OHC TURBO, 2.0 OHV, 2.2 OHV, 2.3 DOHC, 2.4 DOHC, 2.2 DOHC, 2.8 V6, 3.1 V6



Edited 1 time(s). Last edited Monday, October 01, 2007 6:00 PM


Re: The Performance Part Sources Thread
Monday, October 01, 2007 6:14 PM
heres the next go around... I'm still editing and adding ... but heres it is with a complete NOPI listing

this is by no means complete... i worked on it here and there while at work... im about to leave for the day so imma post what i have so far ... (i didnt get to finish categorizing NOPI)... Please Please Please add to this list so we can have one thread of places to go to get parts !!!!

----
Engine Part Sources

First Generation. I don't know too much about these... anyone care to fill it in
1.8 OHV
-
1.8 SOHC N/A
-
1.8 SOHC TURBO
-
2.0 OHV
-
2.0 SOHC N/A
-
2.0 SOHC TURBO
-
2.8 V6
-

Second Generation
2.0 OHV
-
2.0 SOHC N/A
-
2.0 SOHC TURBO
-
2.8 V6
-
2.2 OHV
Mounts:
-Make Your Own Mounts How-To (by Dave Starr)
-J Body Performance (all four)
-Fast Forward Performance (dogbone)

Exhaust:
-Mantapart (cat back with out muffler)
-NOPI (Magnaflow + Razzi)

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-NOPI (Python/Venom)

Throttle Body:
-

Header:
-PaceSetter
-OBX Racing Sports
-NOPI (see exhaust section for brands)

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

Fuel Regulators/Pump
-NOPI (Python/Venom)

Ignition
-NOPI (Nology)

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)

3.1 V6
Underdrive Pulley:
-Fast Forward Performance

Fuel Regulators/Pump
-NOPI (Python/Venom)

Ignition
-NOPI (Wiretec)

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)

Third Generation
2.2 OHV
Mounts:
-J Body Performance (all four)
-Fast Forward Performance (dogbone)
-RK Sport

Intakes
-RK Sport
-NOPI

Exhaust:
-Mantapart (cat back with out muffler)
-RK Sport
-NOPI (Magna-flow + Pacesetter + NOPI by Borla + RK Sport + DC Sports)

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-NOPI (Python/Venom)

Throttle Body:
-

Header:
-PaceSetter
-OBX Racing Sports
-NOPI (See exhaust section for brands)

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

Fuel Regulators/Pump
-RK Sport
-NOPI (Python/Venom)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce + Exedy)

Ignition
-RK Sport
-NOPI (Nology)

Cooling
-RK Sport

Internals
-NOPI (Eagle Rods)

Nitrous
-NOPI (Nitrous Express)

PCM
-NOPI (Python/Venom)

Short Shifters
-NOPI (B&M)

2.2 "2200" OHV
Mounts:
-J Body Performance (all four)
-Fast Forward Performance (dogbone)
-RK Sport

Intakes
-RK Sport

Exhaust:
-Mantapart (cat back with out muffler)
-RK Sport

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance

Throttle Body:
-

Header:
-PaceSetter
-OBX Racing Sports
-NOPI (See Exhaust section for brands)

Underdrive pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)

Fuel Regulators/Pumps
-RK Sport

Clutch/Flywheels
-RK Sport

Ignition
-RK Sport

Cooling
-RK Sport

2.3 Quad 4 DOHC
Mounts
-RK Sport

Intakes
-RK Sport
-NOPI (AEM/DC Sports)

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport
-NOPI (Unorthodox Racing)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce + Exedy)

Exhaust
-RK Sport
-NOPI (Borla + RK Sport + Razzi)

Ignition
-RK Sport

Cooling
-RK Sport

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert

Nitrous Oxide
-NOPI (Nitrous Express)

Peformance Control Module
-NOPI (Python/Venom)

Short Shifter
-NOPI (B&M)

2.4 Twin Cam DOHC
Mounts
-RK Sport

Intakes
-RK Sport
-NOPI (Number 1 + AEM/DC Sports + Injen)

Intake Manifold
-NOPI (Python/Venom)

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport
-NOPI (AEM/DC Sports + Unothordox Racing)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce)

Exhaust
-RK Sport
-NOPI (Pacesetter + Magnaflow + Borla + RK Sport + AEM/DC Sports)

Ignition
-RK Sport

Cooling
-RK Sport

Internals
-RK Sport
-NOPI (Eagle)

Short Shifters
-RK Sport
-NOPI (B&M)

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)


2.2 Ecotec DOHC
Mounts
-RK Sport

Intakes
-RK Sport
-NOPI (AEM/DC Sports + Injen + K&N)

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport

Clutch/Flywheels
-RK Sport

Exhaust
-RK Sport
-NOPI (Pacesetter + Magnaflow + Borla + AEM/DC Sports + Razzi)

Ignition
-RK Sport
-NOPI (MSD + Nology)

Cooling
-RK Sport

Internals
-RK Sport
-NOPI (Eagle + ARP + Ferrea)

Short Shifters
-RK Sport
-NOPI (B&M)

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert.

Performance Control Module - PCM
-NOPI (Python/Venom)

Turbo Kits
-NOPI (Hahn)
---------------------
Those of you with 2.3 DOHC and 2.4 DOHC engines. There is also GM Parts available for your motor.
Some of these can be purchased at the Parts Store (like Advance, Autozone, NAPA, dealer, etc), some will have to be purchased at the bone yard.

2.3 HO Intake and Exhaust Manifolds
2.3 HO Lifters
2.3 HO Secret Cam Swap
2.3 LO Secret Cam Swap (for those of you with 2.4s)
2.3 HO Oil Pump
the heads between these motors are interchangeable as well (with some work)... not for inexperienced tuners.

------------------
Again this is by no means complete... please add to it if you can...




Edited 2 time(s). Last edited Monday, October 01, 2007 6:18 PM


Re: The Performance Part Sources Thread
Monday, October 01, 2007 9:02 PM
FastForwardPerformance is now dead too. You should check out MRZ Performance out of Canada, he seems to be picking up a lot of the categories that they left empty in halting business.






Re: The Performance Part Sources Thread
Monday, October 01, 2007 10:20 PM
third gen, all applications:

Clutch - Centerforce -- http://www.centerforce.com/
Isuzu trans

Getrag

02-05 Eco









Re: The Performance Part Sources Thread
Tuesday, October 02, 2007 6:11 AM
Extreme Delusions(Speedline Z) wrote:Aaron: Which motors do you make mounts for so i can add where appropriate...

theres 1.8 OHV, 1.8 OHC, 1.8 OHC TURBO, 2.0 OHC, 2.0 OHC TURBO, 2.0 OHV, 2.2 OHV, 2.3 DOHC, 2.4 DOHC, 2.2 DOHC, 2.8 V6, 3.1 V6


We make the following:

1995-2002 2.2 OHV Upper Engine Mounts
1996-2002 2.4 LD9 Upper Engine Mounts
1995 2.3L Upper Engine Mounts
2002-2005 2.2 Ecotec Upper Engine Mount
1995-2005 Manual Transmission Mounts
1995-2005 4 Speed Auto Mounts
1995-2005 Lower Aluminum Engine Mounts


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Re: The Performance Part Sources Thread
Wednesday, October 03, 2007 9:38 AM
RSM Racing is now Z-spec.com



2009 Ford Mustang V6

Re: The Performance Part Sources Thread
Wednesday, October 03, 2007 10:19 AM
Are you listing this by who makes the product or who sells it? Clutchmasters makes clutches for jbody cars. Fidanza and spec make lightened flywheels.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: The Performance Part Sources Thread
Wednesday, October 03, 2007 12:37 PM
You could basically take the 1st/2nd gen engines and lump them in three categories: V6, OHV I4 and SOHC I4. With a few exceptions, most anything within each engine category will interchange. Just an idea to save space.





1989 Z24 Convertible - Dust Covered
2006 tC - Dust Covered, but driven more
Re: The Performance Part Sources Thread
Wednesday, October 03, 2007 8:04 PM
TB's, third gen: 2.3/2.4, Eco;

http://mrzperformance.vstore.ca/index.php/cPath/23_25_37



Edited 1 time(s). Last edited Wednesday, October 03, 2007 8:05 PM








Re: The Performance Part Sources Thread
Thursday, October 04, 2007 4:34 PM
Another Update... sorry ive been busy lately...

this is by no means complete... i worked on it here and there while at work... im about to leave for the day so imma post what i have so far ... (i didnt get to finish categorizing NOPI)... Please Please Please add to this list so we can have one thread of places to go to get parts !!!!

This is an Engine Part Source List... Suspension and Transmission related part sources are left off this list because JBO has respective forums for them. Forced Induction componets are listed minorly, however the boost forum is a better place to go for F/I

----
Engine Part Sources

First Generation. I don't know too much about these... anyone care to fill it in
1.8 & 2.0 OHV
Clutch/Flywheel
-Clutch Masters (Stage 0)

1.8 & 2.0 SOHC N/A
Clutch/Flywheel
-Clutch Masters (Stage 0 + Stage 4 (87-89 Getrag-Muncie 4 spd))

1.8 & 2.0 SOHC TURBO
Clutch/Flywheel
-Clutch Masters (Stage 0 + Stage 4 (87-89 Getrag-Muncie 4 spd))

2.8 V6
Underdrive Pully:
-MRZ Peformance

Throttle Body
-MRZ Peformance

EGR Delete Plates
-MRZ Peformance

Clutch/Flywheel
-Clutch Masters (Stage 0 + Stage 4 (85-87) + Stage 1+2+3+4 (85-87 Getrag-Muncie 5 Spd + Isusu 5 Spd))

Second Generation
2.0 OHV
Clutch/Flywheel
-Clutch Masters (Stage 0)

2.0 SOHC N/A
Clutch/Flywheel
-Clutch Masters (Stage 0 + Stage 4 (87-89 Getrag-Muncie 4 spd))

2.0 SOHC TURBO
Clutch/Flywheel
-Clutch Masters (Stage 0 + Stage 4 (87-89 Getrag-Muncie 4 spd))

2.2 OHV
Mounts:
-Make Your Own Mounts How-To (by Dave Starr)
-J Body Performance (all four)
-MRZ Peformance (dogbone)
-Turbo Tech Racing

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-NOPI (Python/Venom)

Throttle Body:
-Z-Spec Automotive Division (MPFI Only)

Exhaust/Headers/Mufflers/Cats:
-PaceSetter
-OBX Racing Sports
-Mantapart (cat back with out muffler)
-NOPI (Magnaflow + Razzi)

Pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)
-Z-Spec Automotive Division (Lightweight - Stock Sizes Only - The site does not mention 91 - 94 however this should be no different)

Fuel Regulators/Pump
-NOPI (Python/Venom)

Ignition
-NOPI (Nology)

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)

Clutch/Flywheel
-Centerforce
-Clutch Masters (Stage 0)

2.8 & 3.1 V6
Underdrive Pulley:
-MRZ Peformance

Fuel Regulators/Pump
-NOPI (Python/Venom)

Ignition
-NOPI (Wiretec)

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)

Mounts
-MRZ Peformance (Dogbone)

Throttle Body:
-MRZ Peformance

EGR Delete Plates
-MRZ Peformance

Clutch/Flywheel
-Clutch Masters (Stage 0)

Third Generation
2.2 OHV
Mounts:
-J Body Performance (all four)
-MRZ Peformance (dogbone)
-RK Sport
-Z-Spec Automotive Division (Lower Only)

Intakes
-RK Sport
-NOPI

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-NOPI (Python/Venom)
-Z-Spec Automotive Division

Throttle Body:
-Z-Spec Automotive Division

Exhaust/Header/Muffler/Cat:
-PaceSetter
-OBX Racing Sports
-Mantapart (cat back with out muffler)
-RK Sport
-NOPI (Magna-flow + Pacesetter + NOPI by Borla + RK Sport + DC Sports)
-Z-Spec Automotive Division

Pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)
-Z-Spec Automotive Division (Light Weight - Stock Sizes Only)

Fuel Regulators/Pump
-RK Sport
-NOPI (Python/Venom)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce + Exedy)
-Centerforce
-Clutch Masters (Stage 0 + 1 + 2 + 3 + 4 (95-97))


Ignition
-RK Sport
-NOPI (Nology)

Cooling
-RK Sport

Internals
-NOPI (Eagle Rods)

Nitrous
-NOPI (Nitrous Express)

PCM
-NOPI (Python/Venom)

Short Shifters
-NOPI (B&M)

2.2 "2200" OHV
Mounts:
-J Body Performance (all four)
-MRZ Peformance (dogbone)
-RK Sport
-Z-Spec Automotive Division (Lower Only)

Intakes
-RK Sport
-Z-Spec Automotive Division

Intake manifold:
-Hogan’s Racing Manifolds
-Venom Performance
-Z-Spec Automotive Division

Throttle Body:
-

Exhaust/Header/Muffler/Cat:
-PaceSetter
-OBX Racing Sports
-Mantapart (cat back with out muffler)
-RK Sport
-NOPI (Magna-flow + Pacesetter + NOPI by Borla + RK Sport + DC Sports)
-Z-Spec Automotive Division

Pulley:
-Auto Specialty Products (requires 66.5" belt for non A/C)
-Z-Spec Automotive Division (Lightweight - Stock Sizes Only)

Fuel Regulators/Pumps
-RK Sport

Clutch/Flywheels
-RK Sport
-Centerforce
-Clutch Masters (Stage 0 + 1 + 2 + 3 + 4 (98-99) + Stage 0 + 1 + 3 + 4 (00-02))

Ignition
-RK Sport

Cooling
-RK Sport

2.3 Quad 4 DOHC
Mounts
-RK Sport
-Turbo Tech Racing

Intakes
-RK Sport
-NOPI (AEM/DC Sports)

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport
-NOPI (Unorthodox Racing)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce + Exedy)
-Centerforce
-Clutch Masters (Stage 0 + 1 + 2 + 3 + 4)

Exhaust
-RK Sport
-NOPI (Borla + RK Sport + Razzi)

Ignition
-RK Sport

Cooling
-RK Sport

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert

Nitrous Oxide
-NOPI (Nitrous Express)

Peformance Control Module
-NOPI (Python/Venom)

Short Shifter
-NOPI (B&M)

Throttle Body
-MRZ Peformance

2.4 Twin Cam DOHC
Mounts
-RK Sport
-Turbo Tech Racing
-Z-Spec Automotive Division (Upper and Lower)

Intakes
-RK Sport
-NOPI (Number 1 + AEM/DC Sports + Injen)
-Z-Spec Automotive Division

Intake Manifold
-NOPI (Python/Venom)
-Z-Spec Automotive Division

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport
-NOPI (AEM/DC Sports + Unothordox Racing)
-Z-Spec Automotive Division (Lightweight - Alternator & Underdrive)

Clutch/Flywheels
-RK Sport
-NOPI (Centerforce)
-Centerforce
-Clutch Masters (Stage 0 + 1 + 2 + 3 + 4 (96 - 99) + Stage 0 + 1 + 3 + 4 (00 - 02))

Exhaust/Header/Muffler/Cat
-RK Sport
-NOPI (Pacesetter + Magnaflow + Borla + RK Sport + AEM/DC Sports)
-Z-Spec Automotive Division

Ignition
-RK Sport

Cooling
-RK Sport

Internals
-RK Sport
-NOPI (Eagle)

Short Shifters
-RK Sport
-NOPI (B&M)

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert

Nitrous Oxide
-NOPI (Nitrous Express)

Performance Control Module - PCM
-NOPI (Python/Venom)

Throttle Body
-MRZ Peformance
-Z-Spec Automotive Division

Supercharger Kits
-Z-Spec Automotive Division (Vortech)

2.2 Ecotec DOHC
Mounts
-RK Sport
-Z-Spec Automotive Division (Lower Only)

Intakes
-RK Sport
-NOPI (AEM/DC Sports + Injen + K&N)
-Z-Spec Automotive Division

Fuel Regulators/Pumps
-RK Sport
-NOPI (Python/Venom)

Pullies
-RK Sport
-Z-Spec Automotive Division (Light Weight - Stock Sizes Only)

Clutch/Flywheels
-RK Sport
-Centerforce
-Clutch Masters (Stage 1 + 3 + 4 (03 - 05))

Exhaust/Header/Muffler/Cat
-RK Sport
-NOPI (Pacesetter + Magnaflow + Borla + AEM/DC Sports + Razzi)
-Z-Spec Automotive Division

Ignition
-RK Sport
-NOPI (MSD + Nology)

Cooling
-RK Sport

Internals
-RK Sport
-NOPI (Eagle + ARP + Ferrea)

Short Shifters
-RK Sport
-NOPI (B&M)

Limited Slip Differential - LSD
-NOPI (Phantom Grip)
Team Green also makes an insert.

Performance Control Module - PCM
-NOPI (Python/Venom)

Turbocharger Kits
-NOPI (Hahn)

Supercharger Kits
-Z-Spec Automotive Division (Vortech)

Throttle Body
-MRZ Peformance
-Z-Spec Automotive Division

---------------------
Those of you with 2.3 DOHC and 2.4 DOHC engines. There is also GM Parts available for your motor.
Some of these can be purchased at the Parts Store (like Advance, Autozone, NAPA, dealer, etc), some will have to be purchased at the bone yard.

2.3 HO Intake and Exhaust Manifolds
2.3 HO Lifters
2.3 HO Secret Cam Swap
2.3 LO Secret Cam Swap (for those of you with 2.4s)
2.3 HO Oil Pump
the heads between these motors are interchangeable as well (with some work)... not for inexperienced tuners.

More information on these swaps can be found at Quad 4 Forums
------------------
Again this is by no means complete... please add to it if you can...

---- Next sites to add
Specclutch.com
kustomjs.net
Turbotechracing - Is anything else offered for the Js? if so... i'll go through the site and add each section applicable


Edited 3 time(s). Last edited Thursday, October 04, 2007 4:55 PM


Re: The Performance Part Sources Thread
Friday, October 05, 2007 5:13 PM
Quote:

Is anything else offered for the Js? if so... i'll go through the site and add each section applicable


Headers = Pacesetter (third gen, all apps), L61 can use LSJ 2.5" primary header









Re: The Performance Part Sources Thread
Monday, October 08, 2007 7:32 AM
dont forget www.gravanatuning.com for just about all of those, along with www.andysautosport.com oh and check out synapseengineering.com for FPRs, BOV's and wastegates. also www.turbotechracing.com and www.j-bodyperformance.com


many changes in the making
my favorite part about doing bodywork,.......... bondo bugers
Re: The Performance Part Sources Thread
Monday, October 08, 2007 7:44 PM
www.crateenginedepot.com (under G5 cobalt products for ecotecs)
www.batesengineering.info (race ecotec parts and custom machine parts)





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search