Hey i have a msd dis 2 box #6211 i got it from a friend but dont have instructions. Msd page has them but i wanna know if anyone has it in there car and if u can tell me a basic setup instructions something that is very umderstandable cause the instructions on the msd page are freakin confusing. I have the MSD coils on my 2.3 quad engine but i wanna know how to wire them and how to wire the icm plug. Thanks

anyone

*cricket*

Sorry I couldn't help more man.
When I put mine together, I didn't think to do a write up on it.
It's been three years and the harness is taped and loomed keeping me from taking a look at the wiring.
Good luck and someone please help Joe out.


Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!

thanks misnblu

someone has to have this setup in there cars.

Alot of guys are running the 6212 box, not the 6211. Im not sure of the differences between the two, but it could be a reason why no one else has chimed in yet.

Trevor Mullins wrote:

kind of like a screwed up kids sing along

pete the anal monkey lived in my bum..............


best epiosode of barney ever lol

ok

how is the 6212 setup, i just want to know how to wire up the icm plug and the msd coils swap i did

look up my post that is just below this, hell i will be nice and post the link

http://www.j-body.org/forums/read.php?f=2&i=430398&t=430398

Thanks for that link Scott.
Nice to see someone wanting to help.
It's been too long since I've done mine and didn't want to remove tape and loom just to see how mine was wired.
Thanks again.



Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!