-MD- Pulleys, Discusion, Cranks and Alternators-Long Read- - Page 9 - Performance Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
Probably not. Since I need at least 10 people for a minimum order.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
How fast will the although spin using one of the smaller pulleys with a stock sized crank pulley?
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
Look back a few posts.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Group Purchase should be up sometime this week for the under driven LG0 sized crank pulley, and smallest "over driven" alternator pulley I can make.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Does your alt pulley work on the lsj alt?
It should, but I haven't ever had a chance to test fit it. You could take a normal j-body alternator pulley and test fit it on there. If it fits. Mine should fit.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
You going to offer them separately or just as a package?
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
I plan to offer them separately as well.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Ah...I just dont have a lsj alt in front of me. I know they have that weird clutch pulley thing on there.
Ill just buy one....if it swaps over great. If not ill sell it.
In for a Ln2 crank pulley
99z for 2015.. I'm back bitches
Philly D wrote:Ah...I just dont have a lsj alt in front of me. I know they have that weird clutch pulley thing on there.
Ill just buy one....if it swaps over great. If not ill sell it.
even with teh clutch pully, it should fit. same shaft dia. only, if it has the clutch on there, it may have an external regulator source, they are a bitch of a set up and can cause the alt to burn out if it's permanently engaged.
I need a new sig.
Group Purchase will be up today or tomorrow.
Sorry for the delay.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Still no GP up yet.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
I have been busy. Completely my fault. Will be up asap.
Is submitted. Just the wait till Dave approve it now.
Edited 1 time(s). Last edited Monday, June 04, 2012 5:52 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
GP is live....
Click ME!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Of all the people who said they wanted on in this thread and I'm the only one who has committed to buying I. The go thread? I feel bad that mike did all this work because people said they wanted them.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
Yeah, i had a line of people. Now no one...
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Finally looking like making pulleys again is possible, and possibly cheaper than ever before. I really hope the new shop I just talked to works out. Hell even ecotec pulleys might be possible!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:Finally looking like making pulleys again is possible, and possibly cheaper than ever before. I really hope the new shop I just talked to works out. Hell even ecotec pulleys might be possible!
LIES all of it
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
i tell yeah...
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
aluminum ac delete pulley!!!
M45/OS crank/2.4 snout. It's nice to be injected but I love being blown!
-Z Yaaaa- wrote:aluminum ac delete pulley!!!
If I had one, that would be my vote,
Jason
99 Z24
LG0/LD9 for Life
10 Year Bash Veteren
Make a full accessory-drive set for the LN2 guys... Underdrive version optional.
Go beyond the "bolt-on".
Forum Post / Reply
You must log in before you can post or reply to messages.