well i found the lil tool as posted on page and and this is my result
bottom piece i just ground of the tabs and made it smooth
took awhile for the top but i got it in
and i think im gonna use the pumps hose but.... any idea on what i should do with the smaller hose fitting on the pump since the 1 i took out didnt have it will it affect it?
Too Whiney wrote:Quote:
should i keep this or use the hose on the pump?
Will the one on the assembly connect to the pump?
i thind so ill check it out now
ok well the regular hose will fit but the little hose fiiting is in the way so.... can i just take it off and leave it open??
go team!
All I want... is a little of the good life
Just a quick note to our valued customers. The FPA-001 (F99-FPA) is not required for the j-body cars. We offer a W-body pump assembly which is the same as the F-body pump assembly less the external jig which was designed to mimic the diameter of the F-body pump. The W-body pump assembly FPA-007 offers the same performance at a lower price.
For most J-body cars the harness is not required from a performance perspective but as we all know the wiring is questionable at best for supporting the factory pump. It is an inexpensive investment which may help eliminate long-term electrical problems with the factory system.
Some people have noted a sealing problem with the venturi feed hose. This is attributed to customers not following the manual's procedure in dealing with the preparation of the hose. If the manual is followed properly this problem should not arise.
Please purchase your Racetronix product from vendors who support this forum. Thanks.
Wow that is a lot cheaper!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Awesome, and its definitely nice to see a company doing some good business and come here posting better info for us even at the cost of bigger price sales! You guys will be getting my business soon!
is that fpa=007 a direct replacement? drop in and go? no cutting or aything?
LE61T PTE6262 Powered
im lame someone tell me the price of the w body pump
please
8 psi with m62 and IAT under 100
$129.99 I think... $146.89 after taxes (for me)...... plus shipping.
I just ordered the fpa-007 we'll see if it just plops in!
LE61T PTE6262 Powered
Qwibby {T3H Old QBE} wrote:I just ordered the fpa-007 we'll see if it just plops in!
Mine fit perfectly, once installed, it isn't going anywhere, only difference was that it was approx. 1/16th taller than stock.
Oh ok, so this seems like a pretty quick swap once the unit is out of the tank huh?
LE61T PTE6262 Powered
Very quick, pull old one out, put new one in, connect the hose, attach clamp, switch the 2 wires for the adapter, put the sending unit back in the tank......... very easy, and mine is actually quieter than stock.
It even comes with the new sock filter that goes on the bottom, also I have no issues with mine when gas goes under 1/4, being that it has the venturi it shouldn't, but I know some have had these issues, none of those so far with this pump, it is giving me no issues at all.
Edited 1 time(s). Last edited Friday, July 02, 2010 3:58 PM