Hey, does anyone have or know where to get a cold air intake for a 97 Cavalier, 2.2? I can find tons of short ram intakes, but no actual COLD AIR intakes. I know there are some for the 2.4, would that fit the 2.2?

The only one I know of is from RD Fabs http://www.rdfabs.com/22noneco_caint.php


www.gmofhouston.com

The question I want to ask is has anyone tried to mod the CAI for the 98+ 2200 to work for the 95-97 2.2?


www.gmofhouston.com

GM_Mike wrote:The question I want to ask is has anyone tried to mod the CAI for the 98+ 2200 to work for the 95-97 2.2?

will be undertaking that task next week, will let you know how it goes.



JBO Stickers! Get yours today!

Thanks Rich, keep us posted. What system are you using?

GM_Mike wrote:The question I want to ask is has anyone tried to mod the CAI for the 98+ 2200 to work for the 95-97 2.2?

I don't see why you couldn't. The part after the first bend after the throttle body should be exactly the same.

I would just cut the neck down to the TB on the 98-02 ebay pipe, fairly easy.


http://www.cardomain.com/ride/3879634
http://www.crysisweb.com/

Yea I would think it could that easy, but want to make sure first. Keep us informed Rich. It would be so much cheaper to get that intake than what we have available now.


www.gmofhouston.com

The TB is oval shaped right? You may want to try and utilize a piece of the factory hose as the connector between it and the modified intake and use SS clamps on both sides. Unless, of course, you just go out and buy an adaptor.


"In Oldskool we trust"

It's not oval shaped, the supplied couplers will be fine.


http://www.cardomain.com/ride/3879634
http://www.crysisweb.com/

Mines oval shaped. Just used a coupler.

It is an oval shaped it's not a perfect circle. Although you can use the supplied coupler like Jesse said.


www.gmofhouston.com

Rich Grayo Jr. wrote:

GM_Mike wrote:The question I want to ask is has anyone tried to mod the CAI for the 98+ 2200 to work for the 95-97 2.2?

will be undertaking that task next week, will let you know how it goes.

Any update on this?


www.gmofhouston.com

you can try this diy type all turbo hose with ss inserts and ss tbolt clamps punch out hole for iat sensor w/gasket punch and ther ya go.
this is on my S10
http://www2.snapfish.com/snapfish/slideshow/AlbumID=277427635/PictureID=6852184924/a=76617370_76617370/share_version=version_B/

Considering the 2.2l has a CAI stock..... just remove the resonator/bong from the bottom of the intake pipe.... put a piece of tube on the end of the intake box so it still goes down into the fender, done.

The kit that I think you want can be found here

http://cgi.ebay.com/ebaymotors/Cool-Cold-Air-Intake-Kit-00-02-Pontiac-Sunfire-2-2L-RED-_W0QQcmdZViewItemQQhashZitem51952e67b1QQitemZ350395197361QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

Its a true cold air intake from the bumper area under your headlight and outside of the engine bay.

I got mine shipped to my door for less than 100$ CAN.

Filter that comes with it is cheap though, might consider a K&N.

Kit fits sunfires or cavaliers 2.2l ohv engines

Hope this helps!




Tunned by Innovative Tuning

Kyle Matthews wrote:The kit that I think you want can be found here

http://cgi.ebay.com/ebaymotors/Cool-Cold-Air-Intake-Kit-00-02-Pontiac-Sunfire-2-2L-RED-_W0QQcmdZViewItemQQhashZitem51952e67b1QQitemZ350395197361QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

Its a true cold air intake from the bumper area under your headlight and outside of the engine bay.

I got mine shipped to my door for less than 100$ CAN.

Filter that comes with it is cheap though, might consider a K&N.

Kit fits sunfires or cavaliers 2.2l ohv engines

Hope this helps!

NEVERMIND ... This kit is for 98 and up.... sorry




Tunned by Innovative Tuning

Kyle Matthews wrote:The kit that I think you want can be found here

http://cgi.ebay.com/ebaymotors/Cool-Cold-Air-Intake-Kit-00-02-Pontiac-Sunfire-2-2L-RED-_W0QQcmdZViewItemQQhashZitem51952e67b1QQitemZ350395197361QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

Its a true cold air intake from the bumper area under your headlight and outside of the engine bay.

I got mine shipped to my door for less than 100$ CAN.

Filter that comes with it is cheap though, might consider a K&N.

Kit fits sunfires or cavaliers 2.2l ohv engines

Hope this helps!

Well I do plan on buying something like that and trying to mod it to fit my 97.


www.gmofhouston.com