Where do you live??....same conditions apply to yours, right?..no leaks, chips, scratches?..email me
never had a leak or anything (watch with my luck they will start leaking) thats my lights in the pic above, if your seriously considering it I can take some better pics, but once them have been in the oven, opened up, taken apart and reglued its never gonna be quite the same as stock but again I've never had a problem
That would be uber hotness if you get them in and done right!!! HID projectors?
bastard! I have my stuff on order for my full retrofit, i cant tell what type of projectors are those? They dont look like bosch e46s, are they single beam or bi-xenon?
Doing a full retro with bulbs/ballasts etc?
My project is going to consist of Hella gen 3 ballasts, Philips 4300k d2s bulbs, TSX projectors and then im gonna color mod them for more color from it, i got lots of plans for my project hopefully over xmas they will be 100% done, gonna paint the main housing all black, add in a halogen projector for turns, try to get a clear lens for the side marker, and something else thats gonna be a secret till its all done
oh ya dual angeleyes too
Good luck with that, look forward to watching you progress.
Hrm are those s2k projectors now that i think of it? thats my best guess
http://www.aplusperformance.com
http://www.modified-motorsports.com
darkstars...bring yours to the dyno day. i think we might be able to work something out there
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
its not gonan be anywhere near as extreme as people are thinking... every 03+ projector housing I've seen I've hated, nothing looks right because of the huge tall space filled with projector housing, it just looks wierd I don' liek it at all. I'm leaving the main headlight area and using these down the tunnel looking thing where the turn signal bulb is, I'm gonna use spray tint on the underside of the lense to dull it down a ton, the actuall headlight bulb and that area are being left alone, I liek how that looks but the turn signal side of things I don't like, so thats all I'm changing.
I think I'm gonna be stuck working the dyno day
I work every saturday
Cheesecake's girlfriend is first in line, if for some reason that falls through I'll let you guys know
id be very careful spray tinting the lens that could really mess with the output, if you do i would make sure to do it on the outside of the lens and not the inside.
Are you going to be putting bulbs in there or just leaving the turn signals in there? Cant wait to see it though!
http://www.aplusperformance.com
http://www.modified-motorsports.com
the ouput will go down which is what I want... you have the cleared turn signals you know how blinding it is at night... all the bulbs will stay what they are now with te projector housing filling the turn signal area, still gonna be a turn signal/parking light which is why I want to mess up the light output... I have no need for them to be anywhere near as bright as they are now
Ok my bad...
Hector gets the lights, I promised him a while back that we could swap lights this winter whe nI do this but after his accident they got messed up which is wh I was looking for someone else... didn't click in my head he gets new ones so I'm still giving him first choice
Darkstars wrote:the ouput will go down which is what I want... you have the cleared turn signals you know how blinding it is at night... all the bulbs will stay what they are now with te projector housing filling the turn signal area, still gonna be a turn signal/parking light which is why I want to mess up the light output... I have no need for them to be anywhere near as bright as they are now
Trust me i know how bright they are.
