Well the car is on Ebay right now, but it doesnt look like its going to sell, it doesnt end until 10pm, so, if for some reason the car gets a bid and sells before 10pm then these parts WILL NOT be for sale. Here they are, MAKE OFFERS ON THESE PARTS

I have decided to move into the direction of either a Suby, or a JDM ITR Teggy.

DO NOT message me and ask how much, make me an offer and we will go from there, I dont want to ship big things like the hood, seats, body kit, or wheels, all parts are pretty much less than 2 weeks old and brand new. Heres a list of everything for sale.

The few pictures I do have are in my registry, I dont own a digital camera so pics could take a while.

Engine:

* Cartech Begi 2025 Adj. FMU
* Innovative Wideband 02 Sensor
* MSD 8.5mm Wires
* MSD Coil Blocks
* AC Delco Coils
* Camaro IAT Sensor
* Prothane Lower Engine Mount
* Prothane Upper Engine Mount
* CenterForce Dual Friction Clutch
* GM Power Pulley
* Custom 2.3 HO Intake Manifold
* RSM Racing 59mm Throttle Body
* Removed A/C
* Garrett T04 Turbo
* Steel Braided Oil Lines
* Turbo XS RFL BOV
* Turbo XS Boost Controller
* Custom Turbo Manifold
* HKS Wastegate
* Custom 2.5in Downpipe
* Holley Forced Induction Fuel Pump
* ApexI Turbo Timer
* Port And Polished Head
* SS Valves
* SS Valve Springs
* Ford Green Top 440cc Injectors
* Spearco Intercooler
* Custom 2.5inch Exhaust
* Turbonetics Silicon Connectors
* Charge Pipes Painted Black
* Heated O2 Sensor
* O2 Simulator
*Polished Compressor Housing
* T-Bolt Clamps
* Carbon Fiber Fuse Box Cover
* Carbon Fiber Brake Fluid Cover
* Carbon Fiber Coolant Resivoir Cover
* Autometer Black Face Fuel Pressure Gauge
* Fuel Rail Painted Black

Suspension/Wheels/Brakes:

* Freedom Design Strut Tower Brace
* Prothane Front End Link Bushings
* RotoTech Cross Drilled And Slotted Rotors
* Ti22 Titanium Brake Pads
* Prothane Control Arm Bushings
* Ground Control Coilovers
* Koni Yellows
* 17inch Gunmetallic Rota Boosts
* 225/45/R17 Nitto Neo Gen Tires

Interior:

* Black Sparco Torino 2 Racing Seats
* Custom Seat Brackets
* Sparco 4 Point Harnesses
* RK Sport White Face Gauges
* Short Shifter
* APC Carbon Look Shift Knob
* White Faced HVAC
* White Faced Dimmer Panel
* Lotek Triple Gauge Pod
* Autometer Boost Gauge
* Autometer Air/Fuel Gauge
* Autometer Oil Pressure Gauge
* Toyota Cavalier Trunk Lid Liner
* Innovative Wideband Black Face Gauge
* Custom Fiberglassed Radio Bezel
* Autometer Volt Gauge

Exterior:

* Shaved Badges
* Shaved Moldings
* Shaved Trunk
* 00+ Toyota Cavalier Tailights
* 2000 Headlight Conversion
* Custom Black Headlights
* Custom Black Corners
* Wings West W Type Lip Kit
* ViS OEM Carbon Fiber Hood

Audio:

* Alpine CD Player
* Soundstorm 660 4 CH AMP
* 2 12in Rockford Fosgate Hx2's

PM me prices for the CF clutch fluid, boost controller, the shocks springs, and the boost gauge if its Z-series. And I want a pic of the radio bezzle, might be interested depending on what it looks like

Darkstars wrote:PM me prices for the CF clutch fluid, boost controller, the shocks springs, and the boost gauge if its Z-series. And I want a pic of the radio bezzle, might be interested depending on what it looks like

Message sent on AIM.

shoot me some prices and pics for the following at nicholasnunley@sbcglobal.net

Autometer Black Face Fuel Pressure Gauge
Fuel Rail Painted Black
Autometer Oil Pressure Gauge
Black Sparco Torino 2 Racing Seats
Custom Seat Brackets
Sparco 4 Point Harnesses

[IMG]http://memimage.cardomain.net/member_images/3/web/2055000-2055999/2055421_15_full.jpg[IMG]

* Cartech Begi 2025 Adj. FMU
* Innovative Wideband 02 Sensor
* MSD 8.5mm Wires
* MSD Coil Blocks
* AC Delco Coils
* Camaro IAT Sensor
* Prothane Lower Engine Mount
* Prothane Upper Engine Mount
* CenterForce Dual Friction Clutch
* GM Power Pulley
* Custom 2.3 HO Intake Manifold
* RSM Racing 59mm Throttle Body
* Removed A/C
* Garrett T04 Turbo
* Steel Braided Oil Lines
* Turbo XS RFL BOV
* Turbo XS Boost Controller
* Custom Turbo Manifold
* HKS Wastegate
* Custom 2.5in Downpipe
* Holley Forced Induction Fuel Pump
* ApexI Turbo Timer
* Port And Polished Head
* SS Valves
* SS Valve Springs
* Ford Green Top 440cc Injectors
* Spearco Intercooler
* Custom 2.5inch Exhaust
* Turbonetics Silicon Connectors
* Charge Pipes Painted Black
* Heated O2 Sensor
* O2 Simulator
*Polished Compressor Housing
* T-Bolt Clamps
* Carbon Fiber Fuse Box Cover
* Carbon Fiber Brake Fluid Cover
* Carbon Fiber Coolant Resivoir Cover
* Autometer Black Face Fuel Pressure Gauge
* Fuel Rail Painted Black

Suspension/Wheels/Brakes:

* Freedom Design Strut Tower Brace
* Prothane Front End Link Bushings
* RotoTech Cross Drilled And Slotted Rotors
* Ti22 Titanium Brake Pads
* Prothane Control Arm Bushings
* Ground Control Coilovers
* Koni Yellows
* 17inch Gunmetallic Rota Boosts
* 225/45/R17 Nitto Neo Gen Tires

Interior:

* Black Sparco Torino 2 Racing Seats
* Custom Seat Brackets
* Sparco 4 Point Harnesses
* RK Sport White Face Gauges
* Short Shifter
* APC Carbon Look Shift Knob
* White Faced HVAC
* White Faced Dimmer Panel
* Lotek Triple Gauge Pod
* Autometer Boost Gauge
* Autometer Air/Fuel Gauge
* Autometer Oil Pressure Gauge
* Innovative Wideband Black Face Gauge
* Custom Fiberglassed Radio Bezel
* Autometer Volt Gauge

Exterior:

* Shaved Badges
* Shaved Moldings
* Shaved Trunk
* 00+ Toyota Cavalier Tailights
* 2000 Headlight Conversion
* Custom Black Headlights
* Custom Black Corners
* Wings West W Type Lip Kit
* ViS OEM Carbon Fiber Hood

Audio:

* Alpine CD Player
* Soundstorm 660 4 CH AMP
* 2 12in Rockford Fosgate Hx2's



There ya go Jay....

how much for the coil overs and the rotors?

nick99z24 wrote:shoot me some prices and pics for the following at nicholasnunley@sbcglobal.net

Autometer Black Face Fuel Pressure Gauge
Fuel Rail Painted Black
Autometer Oil Pressure Gauge
Black Sparco Torino 2 Racing Seats
Custom Seat Brackets
Sparco 4 Point Harnesses

gauge and Rail- 70$
Oil pressure Gauge-$40
Sparcos with harnesses and brackets- Damn its so hard cuz I paid over 1k for this setup, guess 900 would do.

I can low ball you all day


i am here to get some parts so you name the price and we will work from there

meancav01 wrote:I can low ball you all day


i am here to get some parts so you name the price and we will work from there

And I can deny you all day long.

PM Sent cheif.

Tell me what you want for the BOV and Innovate (only if it's a full system and not just the sensor). You might be able to save me a little $$$$ for my project



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

Im not sure on the BOV cause it might be sold. Ill let you know.

Brand New Innovative, Ill take 250 for it.

how much u want for the whole turbo setup???

is it a fully shaved trunk or just the key lock?

Brandon Colby wrote:how much u want for the whole turbo setup???

1,900.00

Quote:

is it a fully shaved trunk or just the key lock?

Just the key lock...but it will prolly stay on the car unless I hear a damn good offer.

how much for the wires and coil packs abd ss valve and springs......seriously interested...

PhilioZ24 wrote:how much for the wires and coil packs abd ss valve and springs......seriously interested...

Not gonna take those off the head, if you want those youll have to buy the entire head.

Wires, Coil Packs, and MSD Interface Blocks go together, for 150.

I also have a Megasquirt V3 for sale fully assembled.

Comes with 10ft long harness ready to wire in and tune.

id take the iwres and all that for 150 meassage me on aim (fatback walker)...im very interested

the real honda killa wrote:id take the iwres and all that for 150 meassage me on aim (fatback walker)...im very interested

No worky with Ecotec-y.

jay pm sent on aim . email me man. sad to see you part with it after all that work. thats dumb .


01 Z24 Turbo /// First Reflashed Turbo AUTO MMMM YUMMY

I just saw your other post.... hope you still have the parts I emailed you about _ akvilhaug@yahoo is the email address. Thanks



Check out my Part Out List!! Great Prices !! http://www.j-body.org/classifieds/detail/52925/

gauge and Rail- 70$
and the yota trunk liner how much?

[IMG]http://memimage.cardomain.net/member_images/3/web/2055000-2055999/2055421_15_full.jpg[IMG]

nick99z24 wrote:gauge and Rail- 70$
and the yota trunk liner how much?

Toyo Trunk lid liner is sold.

Jay wrote:I have decided to move into the direction of either a Suby, or a JDM ITR Teggy.

your cavy looks so much better then either of those two....... plus you already put so much time and money into the cavy, it hardly makes sence to part it out and sell it.

ah well, to each his own I guess.......




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

SpeedRacerZ wrote:

Jay wrote:I have decided to move into the direction of either a Suby, or a JDM ITR Teggy.

your cavy looks so much better then either of those two....... plus you already put so much time and money into the cavy, it hardly makes sence to part it out and sell it.

ah well, to each his own I guess.......

Its not that it doesnt look good, just time to move on, I appreciate the compliments, but I plan on selling all the aftermarket parts and moving onto something better, and keeping the Cavalier as a daily driver.