I need the little plastic wire connector that snaps onto to sensor.  Preferably with 6 inches or wire still attached so I can simply snap it on my sensor and connect the ends together.  Anybody have a junked car I can take one from, or know where I can find one?  I've never used a salvage yard so I haven't tried that route yet.  Do you just show up and walk around aimlessly looking for a possible donor car?
==================

"An okay movie is the same as an ex girlfriend...it was good at the time, 
but you never want to see it again... especially if the movie was a bitch."
 
 
Passenger side on my ex's car broke, I just went to the local yard here and clipped one.  They didn't even charge me.  Hell I took an extra and I know it's somewhere at my grandpa's, but honestly, just call a close yard!
 
 
you guys rock! that's exactly what I was looking for and couldn't find it anywhere else. I've never been to a salvage yard so I've been shy to look there, but I just might have to suck it up and go... otherwise, for $30 I can replace the whole wire from sensor to battery... thanks again!
==================

"An okay movie is the same as an ex girlfriend...it was good at the time, 
but you never want to see it again... especially if the movie was a bitch."
 
 
Or you can save $30 and splice, hell her's has held up for two years now, winter and all!  I won't lie either, it's crimped/butt connector'd, no solder LOL.
 
 
If the connector on yours is the same as the one on the 97's I could get you the plug with the wire all the way back to the C-100 connector if ya want.  I got my old harness sitting here in the box with those still in it.  But the connector with 6 inch of wire should easily fit in an envelope probably.   Just let me know.
i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick