Sagnaw 3-speed M/T pulled from a 1969 C/10 column shift truck. New seals and gaskets, bearings and gears are still in good condition. $100
Chevrolet 250ci inline six, pulled from a 1969 C/10. Was told by the previous owner of the truck that it ran, but i never started it for myself. $100
2.8L V-6. Was pulled from a 1989 5-speed Grand Prix because the engine was over heated. $100
Early 70s Pontiac 400. It has been rebuilt(stock components) but needs new oil control rings and has 2 bent valves. It has the junk #94 heads, 1.65 roller tip steel rockers, new water and fuel pump, Edlebrock Performer RPM intake mani. I also have a flex-a-light fan, Petronix flamethrower distributor, Hays flywheel, universal Accel plug wires, and a few misc things.
I have over $2000 into it and am willing to part it out. Make offer for whole or parts.
Pontiac V-8 heads. 72cc chamber, but 1.94(intake) and 1.66(exhaust) valves. I believe on of the exhaust bolts is broken inside the head. They have not been to the machine shop to get checked out yet. $50
Passenger bedside for a 1967 - 1972 Chevy truck. Little surface rust. $50
Shipping is not possible due to the size of the items. Pick-up only. Everything is located in Springville, PA 18844
Edited 2 time(s). Last edited Friday, July 24, 2009 1:03 PM
Tinkles
2003 Cavalier 1SV
Bagged and Blown
so....what happened to the truck???
You can see the frame rails of it in the pic of the heads, but as of now the truck stays with me. Besides it has been stripped down to the frame rails. Pending a full resto-mod. The 400 was originally going to power the truck, but a LS1 suits my need better than the Poncho.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
I knew you were planning on throwing that poncho in there.....which is why i was concerned.
Ah, i didnt know how much you know about the truck. But for the custom mounts, manifolds, fuel injection, etc I'd rather build a LS1, LS2, LS6, etc. Cheaper parts, more available parts...
But the truck is staying, but no progress will be made until i get on my feet and i atleast get the 1st build of the cav done.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
I'm not trying to be an ass, but isn't this post a violation of the rules? I only ask because I've had posts locked when trying to sell non-jbody stuff in this regional forum...
I dunno, but i do know that this forum is more strict than other regionals. If it gets locked and deleted, oh well. I doubt anyone will buy anything.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
if ya wanna put a 71 ElCo. 12 bolt in the truck let me know my friend has 1 layin round as well as some parts for that truck
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
I already have a built 12-bolt for it. Thanks.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
sucks cuz now i wont be buying that bumper
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
I kinda figured that once i saw the new pics of the cav.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
thats life for me
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
ill ask around maybe i can find someone for the 3 speed . u try this on craigslist ?
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
I tired the papershop a few years ago and almost had a buyer. But he wanted at floor shift unit not column shift, too bad the dumbass didnt know that the trannys are the same and only the shift linkages are different.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
only the real die hard classic car guys know that stuff, guess he wasnt one
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
