Anyone know of a good alignment shop around frederick that can do my alignment to my specs.
What I want
Front:
Toe Out 1/16''/0.12degrees
1/2 degree of negative camber (I have an ingalls fastcam kit comeing in)
Rear: Same as front
I'd really like to get the rear done but if its not possible I'll live with just the front getting done. Went to sears last night and they said they'll only do factory specs.
-Chris
I asked a friend if he knew any places, he told me with what your asking unless you know someone you won't get a shop to do that. Now before I get flamed if this is wrong......I AM NOT THE ONE SAYING THIS!!!!
there's a shop down in DC that might do it - MIGHT - but i can't make any promises. i'm assuming this is in preparation for the autox season? a buddy of mine autoxes his BMW, and he might be able to assist me with shop info.
i'll post up if i can find anything.
Multiple Sclerosis Awareness Week, March 13-17
thanks gals. yes this is for autox.
I'm willing to not worry about getting the rear done if a shop will be willing to do the front.
Otherwise I'll be on my parents car port this weekend learning to use a string box after I install my control arm bushings and camber kit.
-Chris
i'll see what i can find out for you.
Multiple Sclerosis Awareness Week, March 13-17
Hillmuth in DC...best in the area. they're a little pricey, but apparently worth the money.
Hillmuth Automotive
19300 Woodfield Rd
Gaithersburg, MD 20879
(301) 774-0705
my friend took his bimmer there, and they did exactly what he wanted, to the letter.
Multiple Sclerosis Awareness Week, March 13-17
u need shims to do the rear. the alignment computer i used gave me part numbers for my car. yea that cam kit will help adjust ur camber but dont adjust ur toe until u do ur camber or it will be a waste of time bc ur gonna ahve to do the toe over again after u do the camber.
MY 2003 SUNFIRE 15.63@87.86mph
"A N/A ecotec is not gonna give Honda's and Mitsu's that much of a run for their
money unless their blown or bottle fed.GM is still smokin crack!"
~1QWKZ24
www.streetracing.org, 08/2001
lilbit01 wrote:Hillmuth in DC...best in the area. they're a little pricey, but apparently worth the money.
Hillmuth Automotive
19300 Woodfield Rd
Gaithersburg, MD 20879
(301) 774-0705
my friend took his bimmer there, and they did exactly what he wanted, to the letter.
thanks I'll give them a call!
-Chris
good luck ... and remember to post the next saturday event so i can go.
Multiple Sclerosis Awareness Week, March 13-17
Autocrossers Incorporated is having one April 15th I'll post it around April 1st on the board with all the info
-Chris
hmm...the 15th, eh? where's it going to be?
Multiple Sclerosis Awareness Week, March 13-17
Aberdeen, MD Ripken Stadium
Linky
-Chris
do you have a kit? (body)
well i can do it if it doesn't have a kit on it
I got my cam kit in the mail. I'll be doing my front alignment this weekend when I install my Control arm bushings.
Where are you in Frederick? We'll have to meet up sometime and play darts or something.
-Chris
I get it now ,your talking about body kit... I'm just lowered 1.6 or so inches
sorry, brain was thinking camber kit.....
If you can do rear shims send me a PM I'll give you my cell number.
-Chris
