Im looking for a good exhaust shop near or in PA. I would like to get a turbo back done on my GLI. I can buy a bolt on kit for under 1000 bucks, so a price better then that would be great.
Mervin Brothers in Shillington, PA...they can fab up whatever you need...cheaper and by far better quality than Midas, etc.
Kunkle brothers does all of my work and all of my friends work in Shamokin Dam PA. They do very good work for very cheap prices.
For example, if you have a muffler and tip that you want put on, they provide all the piping and charge you anywhere from $30-$100.
If you had your own catback exhaust to put on, I'm sure it'd be even cheaper if they didnt have to bend and provide the piping.
They've done my cavfire, my friends eclipse, cobalt, cobalt sedan, jeep, and ram 1500 all dirt cheap and they back all their work.
if you're interested I'll get you their phone number manng
I'll be running up to RD Fabs when im ready for exhaust. There are only located near Syracuse, NY so its not that bad of a drive from NEPA.
Gehmans exhasut near reading, PA in amish country
i drove 3hrs to have mine done, they were very good and cheap i got a cherrybomb glasspack and full dual ehxaust 2.25 and cat welded all for 60 bucks, only thing is the do pressure bends but it was still a very good price
Kill list:03 eclipse, 06 GTO, 04 Mach 1 Mustang
locdizzel wrote:Gehmans exhasut near reading, PA in amish country
i drove 3hrs to have mine done, they were very good and cheap i got a cherrybomb glasspack and full dual ehxaust 2.25 and cat welded all for 60 bucks, only thing is the do pressure bends but it was still a very good price
mervines is awesome
gehmans is midas compared to mervines..
go to red run here by me.. by far the best and cheapest I have seen and I had 3 mervine setups on my cav
LE61T PTE6262 Powered 
PM me if you want some quotes bud.
outta control in altoona, pa
-- RK Sport Underdriven Crank, TTR Mounts, 4-1 Header,
Catback Exhaust, Reveco 62mm Throttle Body --
Cody I sent you a message on AIM the other night you didnt get back to me.
Scotty B wrote:Cody I sent you a message on AIM the other night you didnt get back to me.
Sorry about that man, I was watching a movie on Joox.net and normally when I get an IM on AIM it pops up in front of the full screen. Only thing I can think of is that since you weren't on my buddy list, it didn't do that. I did see it but only after my movie was over and you must have signed off by then since it said user not available when i replied. But I sent you a PM back with some easy questions, just get back to me when ever and I'll shoot you the quote right back over to ya.
Hrothgar (zack) wrote:Kunkle brothers does all of my work and all of my friends work in Shamokin Dam PA. They do very good work for very cheap prices.
For example, if you have a muffler and tip that you want put on, they provide all the piping and charge you anywhere from $30-$100.
If you had your own catback exhaust to put on, I'm sure it'd be even cheaper if they didnt have to bend and provide the piping.
They've done my cavfire, my friends eclipse, cobalt, cobalt sedan, jeep, and ram 1500 all dirt cheap and they back all their work.
if you're interested I'll get you their phone number manng
im interested. just PM it to me on here
Im a Xbox 360 fanboy...and damn proud of it!!
Another thumbs up here for Mervine's work, it's among the best. Just don't expect to walk in and have the work done while you wait. Every time I have work done there they have the car for like two days. They are always over booked and could probably use some help in the scheduling department.
I remember that... I always had to schedule way a head because I had to wait... never had a ride
LE61T PTE6262 Powered
x2 ...I think maybe once Mervine was able to do the work while waited (just adding a glasspack) and that was during the winter in the off season...the other two times I was there I had to make an appointment..always had the car back the following day. Totally worth the wait though, those guys are damn good at what they do.
Phil aka QBE wrote:locdizzel wrote:Gehmans exhasut near reading, PA in amish country
i drove 3hrs to have mine done, they were very good and cheap i got a cherrybomb glasspack and full dual ehxaust 2.25 and cat welded all for 60 bucks, only thing is the do pressure bends but it was still a very good price
mervines is awesome
gehmans is midas compared to mervines..
go to red run here by me.. by far the best and cheapest I have seen and I had 3 mervine setups on my cav
Where the hell is that place you recommended to me a few years ago, near Reading. That place @!#$ blows donkey dick.
that would have been mervines
LE61T PTE6262 Powered
That place blows. It took the dumbass FOUR HOURS while I sat and waited to cut my exhaust to pieces and dick around trying to fit a @!#$ cutout under my car. I left there that day with a @!#$ty installed cutout and no cat because he couldn't get it to fit. @!#$ idiot.
I then took it to Red Run Exhausts where they had me up and running and did a beautiful job in less than 2 hours. For half what that @!#$ Mervine charged me.
^^That's strange. I've never seen or heard of a quality issue at Mervine's. Their only issue would be the scheduling/waiting.
Yea, well that was my experience. Never will do business there again or even recommend it to an enemy.
