i need some input on a problem with my cavy - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
i need some input on a problem with my cavy
Sunday, August 08, 2010 2:18 PM
i have a low idle misfire and i have replaced everthing from cam and crank sensor to the coils packs and plugs and wires i dont know what else it could be besides the computer and it keeps throwing a code 301 so if anyone could give me some adivce it would be great

Re: i need some input on a problem with my cavy
Sunday, August 08, 2010 3:16 PM
It sounds like the computer to me but then again I am still rackin my brain about it


Always the projects and always the love
Re: i need some input on a problem with my cavy
Sunday, August 08, 2010 7:36 PM
ok thats whats i was thinkin but i dont want to just throw more money at it til i know for sure that is the problemplus it has like 241k miles on it so its seen better days
Re: i need some input on a problem with my cavy
Sunday, August 08, 2010 8:30 PM
Is it throwing a misfire code without it actually misfiring? Or is the low idle misfire actually occurring?


-----
Mike

Re: i need some input on a problem with my cavy
Monday, August 09, 2010 4:25 AM
it keeps throwing the code and i can feel a lil miss in the motor at idle speed but when you give it full throtlle it does not hesitate at all
Re: i need some input on a problem with my cavy
Monday, August 09, 2010 8:52 AM
Check the vacuum lines, one of them casued a low idle misfire in mine, i don't remember off hand which one it was.








Re: i need some input on a problem with my cavy
Monday, August 09, 2010 11:15 AM
Spike J wrote:Check the vacuum lines, one of them casued a low idle misfire in mine, i don't remember off hand which one it was.


x2


-----
Mike

Re: i need some input on a problem with my cavy
Monday, August 09, 2010 2:07 PM
Is this on a 3rd gen?

.



Re: i need some input on a problem with my cavy
Monday, August 09, 2010 3:01 PM
this is on a 96 cavy and it 2nd gen
Re: i need some input on a problem with my cavy
Monday, August 09, 2010 6:30 PM
A 96 is a 3rd gen. 2nd gen ended in 1994.


-----
Mike

Re: i need some input on a problem with my cavy
Wednesday, August 11, 2010 9:09 AM
Exactly why the code 301 and cam sensor seemed strange, since 2nd gens don't have either.

www.j-body.org wrote:Second Generation Forum
Forum specific to the 1988 to 1994 J-cars.





Re: i need some input on a problem with my cavy
Wednesday, August 11, 2010 6:16 PM
ok so my bad it is a third gen
Re: i need some input on a problem with my cavy
Thursday, August 12, 2010 10:54 AM
You'll probably get some good input in 3rd gen and performance.
.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search