89 Z24 paint is finally finished - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
89 Z24 paint is finally finished
Monday, February 29, 2016 6:46 PM
The paint is finished but now I have some scratches in the clear coat after reassembling the bumper covers, rocker panels and trim.
Put Canuck lowering springs on when putting all the stuff back on. Now I need to replace all the suspension rubber, struts and shocks and roll the fenders to stop a slight rub on one corner. Not bad for 18x8.5 wheels with 225 40 18 tires.
This sites size limit for pics is ridulous but I'll try to figure out how to attach some later.

Re: 89 Z24 paint is finally finished
Tuesday, March 01, 2016 6:06 PM
Looking forward to seeing the pictures, no matter what the size is.

For the future, it is a really good idea to put wide blue masking tape around areas where you are putting on panels, etc. It will come right off without any damage to the clear coat and offers pretty good protection,,, just in case something slips..
Re: 89 Z24 paint is finally finished
Tuesday, May 31, 2016 7:57 PM
Fenders are rolled and no rubs. Not bad.
Attachments
finally_rolling_1.jpg (81k)

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search