Anti-Roll Bar - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Anti-Roll Bar
Tuesday, August 13, 2013 8:13 AM
I have replace all of the suspension components on our 1997 Sunfire SE coupe except for the anti-roll bar bushings where it mounts to the frame. There are 4 different sizes listed in the parts catalog and I don't seem to be able to find the size anywhere on line. Anyone out there know what size it is? Just a base Sunfire SE 2.2 L 2 door.

Re: Anti-Roll Bar
Tuesday, August 13, 2013 9:55 AM
Either measure it a few times with a micrometer and pick the number that comes up the most. Or you can check the repo I believe in the trunk under the spare tire or maybe by the vin and see the suspension package you have fe1, fe2, fe3 and then check it and see what sway bar was used in that package.




On the inside my car looks like a fighter jet.
Re: Anti-Roll Bar
Tuesday, August 13, 2013 10:55 AM
An adjustable wrench and a tape measure work if you don't have a caliper. Measure at the middle of the bar, not the bends.
.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search