Hi everyone, I was wondering if you could swap the Brembo breaks off a cobalt ss to a cavalier and if so, what components would I need?
I have a 2003 Chevy Cavalier (stock).
why? the NWF
is more then you'd need and way cheaper
I miss my Cavalier, even if it made 100 hp on a cold day and had more suspension then it deserved.
Im actually about to swap in the cobalt ss brembo brakes on my 04 sunfire. Things that need to be done
*cobalt/hhr front knuckles.
*LSJ hubs (redrill for 5x114.3 for wheel options)
* pads for brembo calipers
*caliper to knuckle bolts from CED
*hub shims for brembo swap from CED
*Cobalt/hhr ball joints
Brembo swap rotors.(redrill to match new bolt pattern)
** if you have BCracing coilovers just get a set of cobalt lower strut mounts.
*if not buy cobalt struts and put jbody upper strut mounts on them.
***you will need to modify the jbody lower control arms by welding up the original holes for the ball joints then drill holes for the cobalt/hhr ball joints
***you will need to also grind the cobalt ball joint plate down just a little making it just thin enough to slide into the jbody control arms.
Hope this helps!!!