I am looking for front and rear strut bars?!? - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
I am looking for front and rear strut bars?!?
Wednesday, July 20, 2005 10:00 AM
I have a 2003 sunfire and am looking for strut bars. I found a DC Sport bar for a Cavalier but the seller could not tell me if it would work on my sunfire. I also need the seller to accept paypal as the payment because I cut up my cards so I would not use them out and about. I know gravana has them for 100 but they don't take paypal.
So if you know of someplace to get strut bars for an 03 sunfire that takes paypal let me know.

Also I put agx and eibach on over the weekend the car handles much better thanks to all that helped with the install. It only took about 2 hrs. because of the instructions found on the jbo.

Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 3:23 PM
just because you cut up your cards doesn't mean that they won't work. All you need is the number and expiration date, which you can probably get off of a statement or by calling your cc company.



Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 4:52 PM
get one on Ebay for like $30. You'll have to move your PCM around to get it to fit, but it's easy. I had an Ebay bar and it worked great---wish I hadn't sold it.





Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 4:53 PM
one thing I forgot...

about moving the PCM...just search this forum---there are a buttload of topics about it.





Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 4:56 PM
Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 5:47 PM
red04cavy wrote:get one on Ebay for like $30. You'll have to move your PCM around to get it to fit, but it's easy. I had an Ebay bar and it worked great---wish I hadn't sold it.


If you find a reputable company that makes a front strut bar, you won't need to move the PCM, the bar works around the PCM if you buy the right one. I should know cause I have one that was made for the ECOTEC motor/bay.

Here is a picture to show you:

<img src="http://memimage.cardomain.com/member_img_a/584592_14_full.jpg">

By the way, the one I have is the RSM Racing front strut bar.



www.kronosperformance.com / 732-742-8837

Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 8:03 PM
NJs Honda Killa would that fit an ecotec with cruise control b/c it looks like you dont have it?
Later
Redrider02


"i reject your reality and substitute my own." -adam savage "mythbusters"
Re: I am looking for front and rear strut bars?!?
Thursday, July 21, 2005 8:46 PM
redrider02 wrote:NJs Honda Killa would that fit an ecotec with cruise control b/c it looks like you dont have it?
Later
Redrider02


The way they advertised it was that it fits ALL ECOTECs so I imagine that they took that into consideration. If your cruise control is the same level as the PCM than you should be fine.



www.kronosperformance.com / 732-742-8837

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search