NX bottle heater problem - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
NX bottle heater problem
Monday, February 28, 2005 10:42 AM
my bottle heater is not coming on. i turn the bottle valve open and the pressure gauge reads 600 psi. so i go turn on the heater. from what i read if the presurre drops below 900 psi the heater kicks on. the heater does not come on. i tired everything i could think of. its still not coming on.
anybody have ideas?



Im a Xbox 360 fanboy...and damn proud of it!!

Re: NX bottle heater problem
Monday, February 28, 2005 2:51 PM
check and recheck all your wiring.... of course

the next step would be finding out if the pressure switch is working.... you can either use resistance across the contacts or just check voltage on the load side of the switch to ground....




Re: NX bottle heater problem
Monday, February 28, 2005 3:47 PM
actaully i have some ideas to try. this NX setup sucks donkey nuts



Im a Xbox 360 fanboy...and damn proud of it!!
Re: NX bottle heater problem
Monday, February 28, 2005 4:10 PM
Fuse? Relay?







Re: NX bottle heater problem
Monday, February 28, 2005 4:54 PM
that's wierd ive only heard good things from NX...



Re: NX bottle heater problem
Thursday, March 03, 2005 5:41 PM
i checked the fuses. nothing wrong from what i can see.
im thinking its the heater itself



Im a Xbox 360 fanboy...and damn proud of it!!
Re: NX bottle heater problem
Sunday, March 06, 2005 5:31 PM
the thought came across my mind of getting a power inverter to plug into my cigarette lighter and wrap a heating pad around the bottle. but i dont think that will be a good idea



Im a Xbox 360 fanboy...and damn proud of it!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search