ebay ecotec turbo manifold - pos - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 12:50 PM
Well I have been figting this manifold for almost 2 weeks, from what I hear there are lots of people running it, I got the from Eric Knight. Anyone see these issues?

1. The runners on the manifold do not allow the stock nuts or even smaller nuts to be put on and tightened, I put a lead on in the cast part with a ball end mill on the bridgeport.




2. the middle bolt on the turbo mani to head cannot be accessed, wrench is impossible because of the water pipe below and so I used a socket head cap screw, cut the allen key in half and the t/3 flange is still in the way, so I shaved down 2 of the 5 allex points and can barely tighten it.


I would have bought or made a tubular but all of my oil lines ( braided ) and downpipe are already done / statred, got it put on and upon tightening the last bolt it stripped the thread in the manifold, so I drilled and tapped for 12mm by 1.25

What a pain in the @ss!!




Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 12:51 PM
Primaily just looking to see if anyone has done anything different with it and worked out.

Thanks



Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 4:05 PM
Hey that used to be mine that thing has become a whore lol the one that didn't fit I just didn't put hardware on it and it was fine


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 4:38 PM
Wow what a pos. I'm so glad I never bought that when I had my 2200. I'd be so pissed.


"In Oldskool we trust"
Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 4:40 PM
Really? What do u mean you put hardware on the one that didn't fit? How did u even get it to fit that way?



Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 5:30 PM
I didnt have this problem with mine bit the wastegate didnt fit lol but a tial would hahah
Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 5:46 PM
Ya chris

I made a rotation flange to take care of that part.



Re: ebay ecotec turbo manifold - pos
Thursday, January 17, 2013 11:42 PM
The studs that I couldn't put nuts on I just rocked it without them and didn't have any problems


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: ebay ecotec turbo manifold - pos
Friday, January 18, 2013 6:17 AM
WOW, nice.... What did you do for the middle one on the bottom? Nothing? This is the hardest one to get in....



Re: ebay ecotec turbo manifold - pos
Friday, January 18, 2013 1:44 PM
prolly nothing lol i never had any problems with it leaking so i neve tried to resolve the problem


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: ebay ecotec turbo manifold - pos
Friday, January 18, 2013 1:56 PM
Honestly, that makes me feel a little better, just wanted to make sure it fully bolted up... what turbo did you run on it?




Re: ebay ecotec turbo manifold - pos
Friday, January 18, 2013 2:48 PM
57 trim garret


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: ebay ecotec turbo manifold - pos
Saturday, January 19, 2013 9:17 AM
You could always make a nut for it.

Make it like a 1" long cap nut and then cut a smaller head size.
Re: ebay ecotec turbo manifold - pos
Saturday, January 19, 2013 9:38 AM
Miller - same here

Philly - custom make a nut? Seriously? Tried everything, had to take the turbo apart to get the flange on.. This was the biggest pain I have ever dealt with turbo wise.



Re: ebay ecotec turbo manifold - pos
Saturday, January 19, 2013 10:19 AM
I have the old style welded manifold and it worked excellent. Of course it has been heavily modified and flows excellent. I'll sell it cheap!




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!

Re: ebay ecotec turbo manifold - pos
Tuesday, January 22, 2013 6:17 PM
Roofs

After all the work I had to make this one fit it will not be off anytime soon!



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search