I need the part # for the interior wiring harness that runs from the BCM to the gauge cluster, steering column, stoplight switch, Clutch saftey switch, . Its just a matter of looking under there and getting the part #'s off the wiring harness. I am pretty desperate here as i was this swap pretty much plug and play as possible.

Or w/e harness the clutch safety switch is on because the one i have now, well apparently just doesn't cut it because its for an automatic. GMpartsdirect's catalog won't list anything.



Edited 1 time(s). Last edited Sunday, January 20, 2008 3:52 PM

do you still need this # or did u get it

nope, i've got 3 of em right now. Probably working on a 4th.

I know where there is a 5th for ya. 04' 4-door, 5-speed w/ABS

Tinkles wrote:I know where there is a 5th for ya. 04' 4-door, 5-speed w/ABS

I need it w/o ABS..... ABS is the devil.

pull the abs relay (if its that simple )



12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]

evilmonkitar wrote:pull the abs relay (if its that simple )

Then you get an idiot light in your gauge cluster. I'm avoiding that pesky thing at all costs if possible. Biggest hurdle now is i have a sunfire interior harness, but a cavalier headlight harness.... Let the re-wiring fin begin!

Actually im not sure if that harness i mentioned has ABS. At the junkyard i noticed a block with brake lines running in and out of it and was located next to the brake reseivior. I assumed it was the ABS controller. But with looking at my 03', im not too sure. My 03' has the same block, but doesnt have ABS.