Just got a centerforce dF clutch for my 2000 2.4 cavalier. Just curious as to if all i need to get now will be a new clutch bearing and then it will be ready to put it back into the car. oh yeah and is a stock one fine to get too.
G--
Not sure what your asking but centerforce doesn't make a throw-out bearing for the 2.4...at least the isuzu thats for sure. GM only sells the throw-out bearing with the slave cylinder which is $500cdn($250cdn@cost) for the 2.4 isuzu. Good luck with that!!
btw, I'm using the Centerforce DF with stock bearing. No problems here. <br>
<A HREF="http://pub10.ezboard.com/bsaugatuners"><IMG SRC="http://www.joshcombs.com/SUPERMAN.jpg"></A>
I just picked up the bearing from a local auto supplier, it cost me $120cad. I think it may be the wrong one tho, the old one didnt have any lines coming out of it and this one does. i Must investigate
G--
The isuzu slave cylindar/through out bearing has lines coming out of it. The getrag dosent. Freakshow since you have a 00' z24 you have the wrong part. <br>
_____________________________________________
94 Honda Del Sol
DOH i thought so but the guy at the counter said it was the right one.I'll have to visit him tomorrow...LOL.. thanks for the confirmation.
G--
I got my throw out for about 99 bucks and its the right one and it came for a parts store.
btw its for an isuzu tranny to <br>
99Z24 Turbocharged (Project Mayhem)
GO BIG OR GO HOME!
yup, mine cost 108 taxes in...too bad it was the wrong one.. LOL ...i'm fixing that little booboo as we speak.
G--
