Well, Im changing wheels again......These are what Im building for it.....Yes IM BUILDING.....I work for The Wheel Source and we own Forgeline Motorsports.....So Im building these for the car now.....I hope to be taking PICS as Im building these...Im still not sure what kolor Im gonna paint/powdercoat the centers.....but Im gonna use the Chrome bolts and polished outer rimshells......Any and al comments welcome......
http://www.forgeline.com/wheels/sp3p.html
P&P Tuning
420.5whp / 359.8wtq
sweet, what are you doing w/ your old rims?
That is gonna look HOT! I like it better than your current wheels. But I love your old C5's
They're mine now!
Lets see 'em in silver first then powdercoat them later? If you were about to powdercoat them first before putting them on. I would say paint them in blue color. What size are you going with?
- Darren
<a><a href="http://phewes.snowpants.org" target="_blank">
<img border="0" src="http://phewes.snowpants.org/summer2005.jpg" alt="get off my sig!" width="338" height="112"></a>
those are freaking sweet i want some now lol
definitly wanna see pics when all done..
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
Quote:
sweet, what are you doing w/ your old rims?
I have them sold...
Quote:
Lets see 'em in silver first then powdercoat them later? If you were about to powdercoat them first before putting them on. I would say paint them in blue color. What size are you going with?
I seriously doubt I will do Silver.....I have already done a few Porches, and NSX, and a few 350Z with the silver......I want them to be more personal to the car...They will be 19x8s.....Im doing a test fit tomorrow so I can determine how much to mill the pad for the right offset....As far as the Blue, I thought about that too.....But I think they would look better in Kandy Orange.....Not sure though.....I may mix a few kolors up and come up something totally different.......
Quote:
those are freaking sweet i want some now lol
lol, I bet you do.....We do sell these like this, and with a solid spoke.......But I have to warn you, they are not cheap......They sell for roughly $900-$1100 EACH.......You guys can check out our site if you would like......
www.forgeline.com
P&P Tuning
420.5whp / 359.8wtq
ImPhat0260/Cavattack2000 wrote:Quote:
Lets see 'em in silver first then powdercoat them later? If you were about to powdercoat them first before putting them on. I would say paint them in blue color. What size are you going with?
I seriously doubt I will do Silver.....I have already done a few Porches, and NSX, and a few 350Z with the silver......I want them to be more personal to the car...They will be 19x8s.....Im doing a test fit tomorrow so I can determine how much to mill the pad for the right offset....As far as the Blue, I thought about that too.....But I think they would look better in Kandy Orange.....Not sure though.....I may mix a few kolors up and come up something totally different.......
Kandy Orange would look hot! Go with it!
Can't wait to see those new wheels on your car.
- Darren
<a><a href="http://phewes.snowpants.org" target="_blank">
<img border="0" src="http://phewes.snowpants.org/summer2005.jpg" alt="get off my sig!" width="338" height="112"></a>
hella of a nice choice Ryan. They will look sweet a$$. But they still are not going to make you fast enough to beat me!! J/P Anyway do you have a time frame to when you will have them done cause i want to see it in person
If your interested in custom aluminum tilt wheel levers hit me up!
boostedeco wrote:hella of a nice choice Ryan. They will look sweet a$$. But they still are not going to make you fast enough to beat me!! J/P Anyway do you have a time frame to when you will have them done cause i want to see it in person
Well, WE machined them last night......Today I was to busy to work on them......Tomorrow I am going to mill 25mm off the pad....If I get time I will start to metal prep them and sandblast them.......So within the next week or 2 after I paint them......BTW, Is Carson bout done with the car......I wanna go out and "play"
J/K, I know Il lose to you, but atleast I will look good doing it......
P&P Tuning
420.5whp / 359.8wtq
I would do the rims blue with a machined lip and switch to a kandy orange brake setup, that would be sick.
ImPhat0260/Cavattack2000 wrote:boostedeco wrote:hella of a nice choice Ryan. They will look sweet a$$. But they still are not going to make you fast enough to beat me!! J/P Anyway do you have a time frame to when you will have them done cause i want to see it in person
Well, WE machined them last night......Today I was to busy to work on them......Tomorrow I am going to mill 25mm off the pad....If I get time I will start to metal prep them and sandblast them.......So within the next week or 2 after I paint them......BTW, Is Carson bout done with the car......I wanna go out and "play" J/K, I know Il lose to you, but atleast I will look good doing it......
I told him it has to be done next week cause i need the car and he said it will be. But we have both heard that before. LOL. But i made a last minute change. I was going with a t4 60-1 but changed my mind to use the same size turbo as last year but just switched the turbine house from a .48a/r to a 63a/r. That way if i don't like the .63 I could always put the .48 on from my old turbo.
But yeah give me a call when you get yours out also and maybe you could meet me at my house in germantown.
If your interested in custom aluminum tilt wheel levers hit me up!
You know those are the rims I want when I get the Cobat SS in the Spring.
Seems like quite a few of my friends with nice show cars has Forgelines. LOL I have about $3,000 earmarked for them already. So hopefully by spring time
Spring Time as in '06 lol
Very nice Ryan they should scratch that will look awesome on the cav
Yes it is a cavalier deal with it
hell yeah ryan those things will be sweet a$$. I should try making some at work
If your interested in custom aluminum tilt wheel levers hit me up!
Looks sweet! I wanna see more progress pics on those wheels. Keep posting them on here!
- Darren
<a><a href="http://phewes.snowpants.org" target="_blank">
<img border="0" src="http://phewes.snowpants.org/future.jpg" alt="get off my sig!"></a>
Gawd I need a job like this looks sweet
Yes it is a cavalier deal with it
I should have painted pics up in the next few days.......
P&P Tuning
420.5whp / 359.8wtq
thats sick lookling. man i wish i had a cnc machine to make wheels out off
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
