stupid question but how do i get the fold down seat out of my 95 z. i cant seem to get the dam thing out .
Ok heres what you do. Fold down the seat on the drivers side partially until you can see the latch where the seat pivots. You can use a flat headed screw driver to pry the outside piece of metal outeward away from the seat then pull up on that side. Once it is out slide the seat twards the outside of the car and it will slide out of the center pivot piece of metal. Do the same for the other side. Putting them back in is just the same but they should just snap right back in. Remeber to put the seat in the center section first before snapping it in the outside.
folf the seat to a 45 degree angle and pull the passenger side till it come out then pull the other side ... install in reverse order.....
JBO'S Mr. 64.....
any body have pics of this being done i have searched but i come up with nothing
