Hello all, a couple people wanted to hear my idle with the exhaust hooked up with the oldschool cams in. Its a little choppy and lots of vibrations but I kinda like it. Sounds a lot deeper in real life.
nice
8 psi with m62 and IAT under 100
I know its not an idle like a 226 or 224 cam but it seriously does shake the dash.
Not bad, was hoping for more lope. Ho cams right?
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
These are 87 2.3 cams. They have the same duration as the HOs but only .340/.350 lift. I was going for the midrange torque in this engine since it will eventually go into the DD vert. I actually have had all these parts laying around so its kind of a frankenmotor with stock bottom end. Now that the Z is running again after taking off the 086 head I can slowly start on its real engine.
Zs Z wrote:I know its not an idle like a 226 or 224 cam but it seriously does shake the dash.
add a few more degrees........
I like it. To bad I only have a tiny .370 exhaust cam in my 02 right now.
Edited 1 time(s). Last edited Wednesday, June 23, 2010 10:16 PM
sounds like if you would mate a pressure washer and a popcorn machine.
gmanz24 (The Bash Whore) wrote:sounds like if you would mate a pressure washer and a popcorn machine.
Haha I agree but it has a much better tone in person. I recorded this on my cellphone so the tone is waaaaay off.
