so much win in here. props Juiced!
Damn sexy
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-Painted the new pass side axle
-Welded mounts for the HID ballasts on the core support / headlight assy and painted it low gloss black
-Painted the mounting flanges of the bumper tube and installed it
-Rivited the HID ballasts in place
-Cleaned the old ass stickers off the radiator and cleaned it and the shrouding
-Cleaned up the engine bay a little
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
This is why me with a welder would be bad, I have 3 dats a week for nothing but messing around with the cars. Ddm ballast ftw
ʇı ɹǝʍo7 | ǝcoMonstǝrs
Ya. I was thinking last night how much stuff I would have never done if I couldnt weld. Its a LONG list.
As for the DDM ballast, I was running lo and hi beams but decided just to go back to lo for simplicity.
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
Wow man its really coming together now! Cant wait to see the next update!
Made the headlight harness last night, and redid the wiring on the headlights themselves. I need to either try and get a new HB cover from DDM or just cover the hole I had from the other HID (Im just running low now for simplicity). Also need to make a bracket to hold the mating connector for the headlights since I wont be able to hold it forever.
I still need to wire up the corner and fender lights. Maybe Ill get to that sat night.
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
So clean
Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Nicest 2nd gen i think i have ever seen
"Hondas are like tampons, every pussy has one!!!"
Transporter7220 wrote:So clean
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
ever thought of making the trailing axel out of aluminium? or converting it rear independant suspention? just sugestions...
i love the build. everything is high quality and well thought out. nothing is overlooked. this car is functional art. i love it.
Front is now basically done other than a new grille. For now Im going to just sorta hack in the origial grille, even tho it fits like crap, until I can get all of my carbon fiber supplies.
Tomorrow, on to the decklid.
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
In for finished pics!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:In for finished pics!
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Its looking beautiful man!
ACav2Envy wrote:Wow! That sir is some amazing work.
I'll second that motion, thats a master piece
Skr8 Goodz in tha hood
Thanks guys. I have the front end all together now and good progress on the deck lid mounts. Ill try to get some pics later tonight or the next time I work on it.
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
Nice bro! I look forward to the update! If you need anything figerglassed let me know! It would be an honor to be apart of a project of this magnitude!
-Adam
Looks really good. Been following from the beginning and was anxiously waiting for the end results. Definately a lot of time spend paying attention to all the little details. Do you plan to paint the trunk lid at some point?
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
So DAMN NICE!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Im definitely going to paint the lid. I just want ALL the fab work done before I do. Hopefully it will get painted this month.
Dan
Currently on jackstands.
Project updates and stuff:
www.clubhousecustoms.com
email: dan at clubhousecustoms dot com