I still have some height, camber, and spacing to dial in. For now I leave you with an inner fitment photo!
This is my 17x9 28mm offset rim with a 215/45 tire and a 10mm spacer.
Untitled by
qwik2k2z24, on Flickr
I am getting antsy!
BeardLife /
Club Awesome Reject Blog
Sorry, but, stretch is gay. I just don't understand it.
Lets see it!!!!
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Qwik2k2z24 wrote:-Z Yaaaa- wrote:i have really been impressed with vibrant products as of late. i bought some exhaust components here recently and the quality was outstanding as far as fit and finish. those lines look just as top notch.
now, i am not understanding things here... why did you go with OEM mounts? are these not ssp's? are they basic's?
Very impressive parts from Vibrant for sure.
These are basics. Nick had the fronts rebuilt by Tein to have damper adjustment when the chrome chipped and caused leaks. So its half and half. The mounts came off my old setup.
Plus look at how much strut travel is gained compared to stock and Tein's mounts.
I never thought about this. I have some mounts similar to OEM chilling in my room. I have dealt with my Teins being low and bouncy for quite a while. I bet swapping the mounts would help a good deal.
How much Stretch you got Bro??
I love GOOOOOOOOOOOOOOLD!
I.... uhhhh..... hmmmm.... uhhhhmmmm...... What he said^
Gold all in my chain
Gold all in my ring
Gold all in my watch
Don't believe me jus' watch
Nigga Nigga Nigga
I love it bro. As I said before do I see gold.
A J-body owner since 1998
91 cavy, 99 sunfire, 00 cavy
06 cobalt SS/SC YELLOW
09 cobalt SS/TC sedan WHITE 1 of 41
I am genuinely in love with that wheel colour.
Like I said before last night in bed, you scared me when you told me you were going with this colour, and I doubted you. I promise I won't do that ever again.
i gotta admit, im liking the gold more now that i see it on the car.
It's nice to be injected but I love being blown.
"Fresh"
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
love it. i've been wanting to see gold wheels on a silver j for years.
DON'T BELIEVE ME, HOP SCOTCH
DON'T BELIEVE ME, CHICKEN POX
I can dig it.
The gold looks awesome with that rim. It really helps the car come alive. Can't wait to see it stanced out!
^Joe, lol.
Thanks guys!
I may push it outside this weekend if the weather clears up to get some sunshine photos.
That garage shot does not do the overall car justice. The colors all tie in so well.
BeardLife /
Club Awesome Reject Blog
Qwik2k2z24 wrote:Thanks guys!
I may push it outside this weekend if the weather clears up to get some sunshine photos.
That garage shot does not do the overall car justice. The colors all tie in so well.
this is what i want to see....give us sun pics asap
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
The Jew wrote:Qwik2k2z24 wrote:Thanks guys!
I may push it outside this weekend if the weather clears up to get some sunshine photos.
That garage shot does not do the overall car justice. The colors all tie in so well.
this is what i want to see....give us sun pics asap
I am waiting for a sunny day in general! Gloomy lately.
Tapped the wastegate for NPT to -4 fitting.
NPT wastegate fitting by
qwik2k2z24, on Flickr
NPT wastegate fitting by
qwik2k2z24, on Flickr
BeardLife /
Club Awesome Reject Blog
inside the rear axle? huh?
It's nice to be injected but I love being blown.
-Z Yaaaa- wrote:inside the rear axle? huh?
Addco suggests to run the "D" bushings and plates opposite of what I did. So the bushing bracket would be flipped over and causing the bar to reside "inside" the axle.
More stuff came:
Final choice for lugnuts:
Untitled by
qwik2k2z24, on Flickr
Battery posts to be used when I hide my battery:
Untitled by
qwik2k2z24, on Flickr
Quik-Latch bumper release pins:
Untitled by
qwik2k2z24, on Flickr
BeardLife /
Club Awesome Reject Blog