Some updates.
Been fighting some issues with the car. Finally found it to be intake manifold gasket. I have been having a hard time keeping them in the car. The manifold for the M62 makes it that I have to make one, so that is part of the problem.
Got this not to long ago.
I also bought this box recently.
This past Sunday my son and I took the vroom vroom car to a indoor cars and coffee.
So I have finally decided to start tearing down the other motor I have. After making some more room in the garage I have done this so far, not much but a start. Plan to have it on the engine stand in a week or so. I will then drop the head off to start that work.
So that box earlier. had this in it.
FU Tuning
I assumed you ended up with the torque plate.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
After doing some cleaning in the garage to make room to work on this.
Finally got the spare LD9 on the stand
Got it to this point
Working a little at a time to get it torn down. Get the head off for work.
FU Tuning