I'm waiting on the money to dynotune it.... Lol.
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
I think i speak for a lot of people when i say..... WE WANT UPDATE! (and your old wheels)
(jFQ~~0_12.JPG)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160556729763&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
I might seriously do this LMAO!
I have black Chrome Spray and Red Metalcast could make it look like it has blood on the teeth haha.
Before I can have a decent shotgun WOT tune or get dyno tuned at ZZP I have 3" mandrel piping waiting to be welded up. I need to install supercharger cooling systems, the pump is in place, need to wire it, need to mount the stock heat exchanger along with the front mount. There are coolant hoses coming off the dual pass and I have everything just need some helping hands. I have a ton of things to install GM extended wheel studs, install my SSBC front and rear brakes, OTTP steering rack spacers. I need to clean up and do right all the engine bay wiring, wire alarm bypass, window and sunroof modules to control via alarm remote, finish painting my retofitted projector headlights.
I don't have a garage in the condo I am renting but I have move out soon, hoping to find a place with a garage. If I can buy the 02 LS Sport for DD winter duty it will help a ton. I can't do a ton without being down for days and all the guys that were JBOMers don't talk to me anymore, my old friends are partying into drugs, or have full time jobs and most are married/getting married/just got married, have kids etc. I hope to get out more when I can start a job next week or so, baring it isn't too much for my drug filled body. It's getting cold here in MI as well so I need to do things ASAP.
Hoping things will be looking up soon!
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
KG wrote:I think i speak for a lot of people when i say..... WE WANT UPDATE! (and your old wheels)
I want my old wheels too, they were custom painted by me. If I cant snag another car, I am grabbing the KNOCK OFFS!! I had the 5-Zigens in Bronze on my Z24, and the knock offs. Both weigh the same, I don't like the Zigens Bronze as much as the paint I used or powercoat I could use.
I have an idea for the current wheels that might make them more well liked.
Was waiting on free weldup of the exhaust, going to get that done, trying to see if I can get a decent street tune done around me. Today it was a breezy 75 degrees cooling down from 80+ I sprayed the car off so I jumped on the highway. 2nd-3rd shift the tires broke loose and hit 15psi solid to 95mph on the stock TVS pulley. Normally I would see 11-13 spike, saw 15psi in the middle of 100 degree summer with the 2.8" pulley have no cooling setup working yet. So when my body can handle it and I have some help the cooling mods and a street tune I can see the TVS making 20-25psi no problem,
Yes PSI means nothing, but to you L61 guys it should give you an idea of what its doing. I know dicktease!
For the wheel haters lol
\
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
that car looks much better now. im a fan.
-Z Yaaaa- wrote:that car looks much better now. im a fan.
Thanks, means alot from you. I have always loved your car and most of your taste and opinions posted. I lurk here but don't really post as often as I used to.
Just a few cell phone snapshots.
Anyone want to make me a Signature max 500x200 using modlist or at least that its a 2.4 and TVS that would be nice.
Harrop TVS Supercharger/LS4 TB/Pacesetter Header/3" Exhaust/OTTP P&P IM Dual Pass/Heat Exchanger/80lb Injectors
18" Drag DR-21/235-40-18 Nitto NT555/Canuck Springs on FE5s/Coppertop Strutbar/Progress Rear Swaybar/SSBC BigBrakes F&R
Redline Recaros/Leather Wheel/Door Panels
Have more stuff than that installed and not installed, and a lot of the list needs to go on, as well as things that aren't listed. I can't wait to have this car more to my standards as it is now I hate the thing because there are so many things that need to be done, projects that have been started and not finished. It also has way too many things inside and out cosmetically that are horrible for a car that has 32k on it!
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
2 months and still no tune/#'s booooooooooooooooooooooo
LAFNGAS wrote:2 months and still no tune/#'s booooooooooooooooooooooo
Niggas is broke deez dayz!!
[URL=http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-53-49_550.mp4]
[/URL]
[URL=http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-56-01_336.mp4]
[/URL]
[URL=http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-29-42_603.mp4]
[/URL]
[URL=http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-31-24_179.mp4]
[/URL]
Cooling mods need to go on, SSBC brakes, etc, but after cooling mods is a dyno tune.
Work is killing me, can't wait to get my business off the ground!
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-53-49_550.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-56-01_336.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-29-42_603.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-31-24_179.mp4
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-53-49_550.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-24_17-56-01_336.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-29-42_603.mp4
http://s998.photobucket.com/albums/af103/robscavz24/?action=view¤t=2011-11-25_23-31-24_179.mp4
TheSundownFire wrote:F. I tried. Haha.
Lol this is the ONLY site that it never works on!
Pacesetter Ceramic Header, Vband connected to it, mandrel bent 3" downpipe, two o2 bungs, flexpipe, vband, 3" Magnaflow XL 3 Chamber 7" round 3 foot long "resonator" lol really a truck muffler, vband, MES mandrel bent piping til over axel, vband, then MES piping, vband, MES piping to a Magnaflow Oval Polished Stainless Steel straight through 3" muffler with built in dual wall slant cut tip.
I will have pics soon! Vids are worth a listen!
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
70mm pulley is on, trans isnt liking all the power.... 20 PSI in this cold, oh blower loves it. My HPT cable took a sh!t and ebay sent me the wrong one.____ Anyone local I need one bad lol.
Either an HHR SS/TC or a beater DD is needed or I have to drive this Michigan winter in the beast. I want to tear it apart, cage it and swap to the 6peed auto B&M slap shift and build an engine this winter hopefully my shop will be done by then. Custom mounted Stance coilovers (Cobalt only fit) will be next, some sick wheel setup/ups and I am going crazy with this car even though I am poor as hell right now.
You only live once right??
BLOWN2POINT4 Ion Quad Coupe Autotragic
Powered By Harrop TVS Made By Tupperware
TVS, LS4 TB, 80's, OTTP Port&Polish I/M DualPass, OTTP H/E, Pacesetter Header, Full 3" Exhaust
