im planning on getting the front bumper,rear bumper and side skirts of the z24 onto my sedan. my question is: IS everything bolt on or i have i to modify the bumpers.i know the side skirt will have to be modified. any ideas??
what about side skirts from a 4 door z24 that way you dont need to modify them?
If you want to use the fog lamps from the Z-24's than yes you have to wiring them up, and if you wanted them to look factory, then you would also have to get a new dimmer swith panel that is located on the left side of the steering wheel, so that is accomidates both the dimmer switch, as well as the fog lamp switch. Othwerwise you can just use any kind of switch that you want. The front and rear bumpers will bolt right on in place of your old ones. The only thing that you will have to do is get a new front wheel well peice. The one that you have now does not go low enough to wrap underneith the front of the bumper. Just go the delaer and get a front wheel well for driver and passenger for a 2-door z-24, The year doesn't matter at, any one form 95-99 will work. The side skirts you don't have to modify at all, they bolt right on also. You don't have to "stretch" or "cut" them at all, The only thing that might me hard is if you don't have skirts now, then you will have to drill holes in the under siide of the frame to mount to the skirts. You'll see what i mean when you get ready to mount them. I little time and effort and patience and you can get them on perfect. Hope it helps.
I am what I am and it is what it is.
I am the 2nd most untrusted person in the world next to a lawyer,welcome to our dealership, may I help you?
side skirts from a 2 door are the same length as skirts from a 4 door. no modifying. are you getting the front/rear bumpers from a the 96 year style z24 or from the 2000+ year body style?
GO PATS!!!
so far the 1996 kit is going on it, 2000+ look hit too
